PyDenseCRF
This is a (Cython-based) Python wrapper for Philipp Krähenbühl's Fully-Connected CRFs (version 2).
If you use this code for your reasearch, please cite:
Efficient Inference in Fully Connected CRFs with Gaussian Edge Potentials
Philipp Krähenbühl and Vladlen Koltun
NIPS 2011
and provide a link to this repository as a footnote or a citation.
Installation
You can install this using pip
by executing:
pip install git+https://github.com/lucasb-eyer/pydensecrf.git
and ignoring all the warnings coming from Eigen.
Note that you need a relatively recent version of Cython (at least version 0.22) for this wrapper,
the one shipped with Ubuntu 14.04 is too old. (Thanks to Scott Wehrwein for pointing this out.)
I suggest you use a virtual environment and install
the newest version of Cython there (pip install cython
), but you may update the system version by
sudo apt-get remove cython
sudo pip install -U cython
Usage
For images, the easiest way to use this library is using the DenseCRF2D
class:
import numpy as np
import pydensecrf.densecrf as dcrf
d = dcrf.DenseCRF2D(640, 480, 5) # width, height, nlabels
Unary potential
You can then set a fixed unary potential in the following way:
U = np.array(...) # Get the unary in some way.
print(U.shape) # -> (5, 640, 480)
print(U.dtype) # -> dtype('float32')
U = U.reshape((5,-1)) # Needs to be flat.
d.setUnaryEnergy(U)
# Or alternatively: d.setUnary(ConstUnary(U))
Remember that U
should be negative log-probabilities, so if you're using
probabilities py
, don't forget to U = -np.log(py)
them.
Requiring the reshape
on the unary is an API wart that I'd like to fix, but
don't know how to without introducing an explicit dependency on numpy.
Getting a Unary
There's two common ways of getting unary potentials:
-
From a hard labeling generated by a human or some other processing. This case is covered by
from pydensecrf.utils import unary_from_labels
. -
From a probability distribution computed by, e.g. the softmax output of a deep network. For this, see
from pydensecrf.utils import unary_from_softmax
.
For usage of both of these, please refer to their docstrings or have a look at the example.
Pairwise potentials
The two-dimensional case has two utility methods for adding the most-common pairwise potentials:
# This adds the color-independent term, features are the locations only.
d.addPairwiseGaussian(sxy=(3,3), compat=3, kernel=dcrf.DIAG_KERNEL, normalization=dcrf.NORMALIZE_SYMMETRIC)
# This adds the color-dependent term, i.e. features are (x,y,r,g,b).
# im is an image-array, e.g. im.dtype == np.uint8 and im.shape == (640,480,3)
d.addPairwiseBilateral(sxy=(80,80), srgb=(13,13,13), rgbim=im, compat=10, kernel=dcrf.DIAG_KERNEL, normalization=dcrf.NORMALIZE_SYMMETRIC)
Both of these methods have shortcuts and default-arguments such that the most common use-case can be simplified to:
d.addPairwiseGaussian(sxy=3, compat=3)
d.addPairwiseBilateral(sxy=80, srgb=13, rgbim=im, compat=10)
Non-RGB bilateral
An important caveat is that addPairwiseBilateral
only works for RGB images, i.e. three channels.
If your data is of different type than this simple but common case, you'll need to compute your
own pairwise energy using utils.create_pairwise_bilateral
; see the generic non-2D case for details.
A good example of working with Non-RGB data is provided as a notebook in the examples folder.
Compatibilities
The compat
argument can be any of the following:
- A number, then a
PottsCompatibility
is being used. - A 1D array, then a
DiagonalCompatibility
is being used. - A 2D array, then a
MatrixCompatibility
is being used.
These are label-compatibilites µ(xi, xj)
whose parameters could possibly be learned.
For example, they could indicate that mistaking bird
pixels for sky
is not as bad as mistaking cat
for sky
.
The arrays should have nlabels
or (nlabels,nlabels)
as shape and a float32
datatype.
Kernels
Possible values for the kernel
argument are:
CONST_KERNEL
DIAG_KERNEL
(the default)FULL_KERNEL
This specifies the kernel's precision-matrix Λ(m)
, which could possibly be learned.
These indicate correlations between feature types, the default implying no correlation.
Again, this could possiblty be learned.
Normalizations
Possible values for the normalization
argument are:
NO_NORMALIZATION
NORMALIZE_BEFORE
NORMALIZE_AFTER
NORMALIZE_SYMMETRIC
(the default)
Kernel weight
I have so far not found a way to set the kernel weights w(m)
.
According to the paper, w(2)
was set to 1 and w(1)
was cross-validated, but never specified.
Looking through Philip's code (included in pydensecrf/densecrf),
I couldn't find such explicit weights, and my guess is they are thus hard-coded to 1.
If anyone knows otherwise, please open an issue or, better yet, a pull-request.
Inference
The easiest way to do inference with 5 iterations is to simply call:
Q = d.inference(5)
And the MAP prediction is then:
map = np.argmax(Q, axis=0).reshape((640,480))
If you're interested in the class-probabilities Q
, you'll notice Q
is a
wrapped Eigen matrix. The Eigen wrappers of this project implement the buffer
interface and can be simply cast to numpy arrays like so:
proba = np.array(Q)
Step-by-step inference
If for some reason you want to run the inference loop manually, you can do so:
Q, tmp1, tmp2 = d.startInference()
for i in range(5):
print("KL-divergence at {}: {}".format(i, d.klDivergence(Q)))
d.stepInference(Q, tmp1, tmp2)
Generic non-2D
The DenseCRF
class can be used for generic (non-2D) dense CRFs.
Its usage is exactly the same as above, except that the 2D-specific pairwise
potentials addPairwiseGaussian
and addPairwiseBilateral
are missing.
Instead, you need to use the generic addPairwiseEnergy
method like this:
d = dcrf.DenseCRF(100, 5) # npoints, nlabels
feats = np.array(...) # Get the pairwise features from somewhere.
print(feats.shape) # -> (7, 100) = (feature dimensionality, npoints)
print(feats.dtype) # -> dtype('float32')
dcrf.addPairwiseEnergy(feats)
In addition, you can pass compatibility
, kernel
and normalization
arguments just like in the 2D gaussian and bilateral cases.
The potential will be computed as w*exp(-0.5 * |f_i - f_j|^2)
.
Pairwise potentials for N-D
User @markusnagel has written a couple numpy-functions generalizing the two
classic 2-D image pairwise potentials (gaussian and bilateral) to an arbitrary
number of dimensions: create_pairwise_gaussian
and create_pairwise_bilateral
.
You can access them as from pydensecrf.utils import create_pairwise_gaussian
and then have a look at their docstring to see how to use them.
Learning
The learning has not been fully wrapped. If you need it, get in touch or better yet, wrap it and submit a pull-request!
Here's a pointer for starters: issue#24. We need to wrap the gradients and getting/setting parameters. But then, we also need to do something with these, most likely call minimizeLBFGS from optimization.cpp. It should be relatively straightforward to just follow the learning examples included in the original code.
Common Problems
undefined symbol
when importing
If while importing pydensecrf you get an error about some undefined symbols (for example .../pydensecrf/densecrf.so: undefined symbol: _ZTINSt8ios_base7failureB5cxx11E
), you most likely are inadvertently mixing different compilers or toolchains. Try to see what's going on using tools like ldd
. If you're using Anaconda, running conda install libgcc
might be a solution.