This project is written for the term project of BAU/CMP3010.
Name | Quantity | Component |
---|---|---|
U1 | 1 | Arduino Uno R3 |
U2 | 1 | LCD 16 x 2 |
Rpot2 | 1 | 250 kΩ Potentiometer |
R1-R5 | 5 | 1 kΩ Resistor |
U4 | 1 | Temperature Sensor [TMP36] |
PIEZ01 | 1 | Piezo |
S1-S4 | 4 | Pushbutton |
- Hold B2 for 3 seconds to start setup - alarm minute will blink
- Use B3 to adjust alarm minute
- Press B2 once to switch to hour - alarm hour will blink
- Use B3 to adjust alarm hour
- Press B2 again to end setup
- Hold B1 for 3 seconds to start setup - clock minute will blink
- Use B3 to adjust clock minute
- Press B1 once to switch to hour - clock hour will blink
- Use B3 to adjust clock hour
- Press B1 again to end setup