everytrade-plugins

Enhance an existing module with new components

Fork this repository.
Implement your new plugin in plugin-base OR just use an already existing plugin and add just your new extensions (e.g. a new connector, parser, etc.). In any case, you can use the template classes located in plugin-template module, copy the appropriate ones to your desired location and start customizing them. If you don't want to add a new plugin but use an existing plugin as parent instead, don't forget to change the parent plugin's code to include/reference your new functionality where appropriate.

Customize the template code

your Gradle module can contain multiple plugins and each plugin can contain multiple connectors, parsers, or other extensions. Add plugins/extensions as appropriate (see other parts of this document for more details).
Rename the template classes and packages as you see appropriate.
Choose a unique plugin ID (a good approach is to base the name off of you organization's name)

Adding a new connector

Choose a connector ID unique in the scope of your plugin
Choose your connector's parameters and create a connector descriptor. This will be transformed into a user-facing form to fill the connector's instance parameters (usually credentials, remote URL, etc.).
Implement IConnector and its methods (most importantly the getTransactions method).
You can take a look at the plugin-base module for some inspiration. It contains some real plugin implementations.
Respect connector limitations:
- There's a limit on how many transactions can be downloaded during a single download pass (10,000). Don't try to download more than the single-pass limit. If your transaction source has additional data, you will dowload more during the next download pass. Connectors are called periodically (multiple times per hour) to keep the portfolios in sync with the source of data, so this shouldn't be a problem. Eventually, your portfolio will become synchronized.
- Close all unneeded resources (if present) in the close method which is called when the connector instance goes out of scope. In order to save resources, connector instances are destroyed after each download pass.

Adding a new parser

Choose a parser ID unique in the scope of your plugin.
Create a parser descriptor. It describes which files the parser is able to parse - using file header templates and supported exchange for each header template. The header template can directly match the header in the file or can be entered like a regular expression.
Implement ICsvParser and its methods (most importantly the parse method - which should parse a csv file with some specific header template).
You can take a look at the plugin-base module for some inspiration. It contains some real plugin implementations.

Adding a new fiat currency

Edit the Currency enum and add the appropriate currency. Set the enum constructor parameters accordingly. After the code makes it's way into the next Everytrade release, our fiat rates service should recognize your currency and start downloading the rates at startup.

Adding a new crypto currency

Edit Currency enum and add the appropriate currency. Set the enum constructor parameters accordingly. Make sure there is a rate provide (IRateProvider implementation) for the currency (supporting both USD and BTC as quotes). Since you're adding a new currency, you'll probably have to extend an existing crypto

rate provider or write a new one for your currency.

Adding a crypto rate provider

Choose a rate provider ID unique in the scope of your plugin.
Create a rate provider descriptor. It lists the currencies whose rates can be supplied by this rate provider.
Implement IRateProvider and its methods. Make sure your provider supports USD as well as BTC rates for your currency (e.g. when adding LTC rate provider, you should support rates for LTC/USD and LTC/BTC).
Again, plugin-base module contains some real implementations you can use as inspiration.

Adding a new exchange

Just add a new entry to the SupportedExchange enum.

Implementing new components as a new module

Fork this repository.
Add new Gradle module:
1. Duplicate the directory plugin-template which server as a plugin implementation template.
2. Include the new module in settings.gradle.
3. Customize your plugin's build.gradle (module's group and jar manifest). Don't touch the rest if you don't know what you're doing. Specifically, the initial set od Gradle dependencies is the recommended minimum. You can add libraries as you progress with the plugin implementation, but you shouldn't remove any of the initial dependencies.
Customize the template code (as described before).

Using libraries

To declare your plugin dependencies via Gradle, use only compileOnly, pluginCompile or pluginRuntime dependency configurations depending on whether you need the library during compilation only, compilation and runtime or only runtime, respectively.

Building custom plugin

Run ./gradlew :<your-plugin>:build (with substituted with the actual Gradle module name you chose) in the repository root dir.

Testing custom plugin

The repository contains the plugin-tester module to help you with testing your plugin. The tester is already set-up to test the plugin-base module's plugins.
Edit the plugin-tester/build.gradle file's task gatherPlugins and add a dependency on your plugin module's JAR. You can also remove the dependency on plugin-base module's JAR if you want to concentrate just on testing your own module.
Prepare connector credentials and/or other parameters.
- In order to pass parameters to your connector's instances, you have to create a property file.
- In the plugin-tester directory create a Java property file named <connector-id>.properties, e.g. for the Everytrade Kraken Connector, the file name is everytrade.krkApiConnector.properties bacause the connector's ID is krkApiConnector and the connector parent plugin's ID is everytrade.
- The file's content will be loaded into a map as key-value pairs and used to initialize the connector's instance. Your code can read the data in the createConnectorInstance method implementation. The template implementation just passes the data into the connector's constructor.
Prepare test CSV files with transactions which you want to parse in the parser-files directory.
Run the Gradle task :plugin-tester:run either via your IDE of choice (recommended, as you can debug your plugin this way) or via the command line (in the repository's root dir, run ./gradlew :plugin-tester:run).
Watch the tester's output to determine whether correct data is downloaded and correct data is parsed.
- For the tested connector the tester specifically tries two passes of the download procedure in order to check whether your connector can correctly resume download from where it left off after the first download pass. In order to fully test this, you should adjust your connector when testing to limit the amound of data being downloaded in a single pass.
- The tester tries to parse each file in the parser-files directory with an appropriate parser. A parser is chosen based on a match between the CSV file's header and one of the parser's advertised headers.

Contribute back and make it part of Everytrade cloud instance

How to create a new plugin and make it part of the Base Plugin Pack:

Fork this repository on GitHub.
Implement your plugin inside the plugin-base module.
Test your plugin with the built-in tester.
Create pull request.
Make it through our code review.

Deploying to on-premise instance

Build you plugin module's JAR

Determine you docker volume mountpoint:

 $ docker volume inspect everytrade_webapp-data | grep Mountpoint

Most probably the output should match the following:

           "Mountpoint": "/var/lib/docker/volumes/everytrade_webapp-data/_data",

Copy the JAR into the plugins subdirectory located underneath the mountpoint (i.e. for the mountpoint /var/lib/docker/volumes/everytrade_webapp-data/_data copy the JAR into /var/lib/docker/volumes/everytrade_webapp-data/_data/plugins directory)

Restart the Everytrade webapp container:

$ docker container restart everytrade_webapp_1

Check the container logs whether your plugin has been loaded:

$ docker logs everytrade_webapp_1

and look for something like the following in the output:

[...]
2020-09-11 14:44:39,660 INFO  [ejb.PluginRegistry] (ServerService Thread Pool -- 88) Reloading plugins...
2020-09-11 14:44:39,734 INFO  [pf4j.AbstractPluginManager] (ServerService Thread Pool -- 88) Plugin 'everytrade-base@1.0.3' resolved
2020-09-11 14:44:39,735 INFO  [pf4j.AbstractPluginManager] (ServerService Thread Pool -- 88) Start plugin 'everytrade-base@1.0.3'
2020-09-11 14:44:39,810 INFO  [ejb.PluginRegistry] (ServerService Thread Pool -- 88) Loading plugin 'generalbytes'...
2020-09-11 14:44:39,814 INFO  [ejb.PluginRegistry] (ServerService Thread Pool -- 88) Found connector 'generalbytes.GBConnector'.
2020-09-11 14:44:39,818 INFO  [ejb.PluginRegistry] (ServerService Thread Pool -- 88) Finished loading plugin 'generalbytes'.
2020-09-11 14:44:39,820 INFO  [ejb.PluginRegistry] (ServerService Thread Pool -- 88) Loading plugin 'everytrade'...
2020-09-11 14:44:39,820 INFO  [ejb.PluginRegistry] (ServerService Thread Pool -- 88) Found connector 'everytrade.krkApiConnector'.
2020-09-11 14:44:39,820 INFO  [ejb.PluginRegistry] (ServerService Thread Pool -- 88) Found connector 'everytrade.bitstampApiConnector'.
2020-09-11 14:44:39,820 INFO  [ejb.PluginRegistry] (ServerService Thread Pool -- 88) Found connector 'everytrade.etApiConnector'.
2020-09-11 14:44:39,821 INFO  [ejb.PluginRegistry] (ServerService Thread Pool -- 88) Found connector 'everytrade.coinmateApiConnector'.
2020-09-11 14:44:39,821 INFO  [ejb.PluginRegistry] (ServerService Thread Pool -- 88) Finished loading plugin 'everytrade'.
[...]

You should see your components being loaded.

Implemented exchange API connectors and parsers

Plugin ID	Connector/parser ID	Type	Exchange
generalbytes	generalbytes.GBConnector	Connector	General Bytes
everytrade	everytrade.everytradeParser	Parser	General Bytes
everytrade	everytrade.etApiConnector	Connector	EveryTrade
everytrade	everytrade.everytradeParser	Parser	EveryTrade
everytrade	everytrade.krkApiConnector	Connector	Kraken
everytrade	everytrade.everytradeParser	Parser	Kraken
everytrade	everytrade.bitstampApiConnector	Connector	Bitstamp
everytrade	everytrade.everytradeParser	Parser	Bitstamp
everytrade	everytrade.coinmateApiConnector	Connector	CoinMate
everytrade	everytrade.everytradeParser	Parser	CoinMate
everytrade	everytrade.bitfinexApiConnector	Connector	Bitfinex
everytrade	everytrade.everytradeParser	Parser	Bitfinex
everytrade	everytrade.binanceApiConnector	Connector	Binance
everytrade	everytrade.everytradeParser	Parser	Binance
everytrade	everytrade.bittrexApiConnector	Connector	Bittrex
everytrade	everytrade.everytradeParser	Parser	Bittrex
everytrade	everytrade.coinbaseProApiConnector	Connector	Coinbase Pro
everytrade	everytrade.everytradeParser	Parser	Coinbase Pro
everytrade	everytrade.bitmexApiConnector	Connector	Bitmex
everytrade	everytrade.everytradeParser	Parser	Bitmex
everytrade	everytrade.huobiApiConnector	Connector	Huobi
everytrade	everytrade.everytradeParser	Parser	Huobi
everytrade	everytrade.okxApiConnector	Connector	OKX
everytrade	everytrade.everytradeParser	Parser	OKX
everytrade	everytrade.everytradeParser	Parser	bitFlyer
everytrade	everytrade.everytradeParser	Parser	Coinsquare
everytrade	everytrade.everytradeParser	Parser	HitBTC
everytrade	everytrade.everytradeParser	Parser	LocalBitcoins
everytrade	everytrade.everytradeParser	Parser	Paxful
everytrade	everytrade.everytradeParser	Parser	Poloniex
everytrade	everytrade.everytradeParser	Parser	ShakePay

JuanParker1 / everytrade-plugins