JuanParker1 / cryptoeye

CryptoEye. Deploy on server Ubuntu 18

INSTALL PYTHON & PIP

sudo add-apt-repository ppa:jonathonf/python-3.6

if it gives add-apt-repository: command not found than use: sudo apt-get install software-properties-common

Put each command separatly, one by one

sudo apt update
sudo apt install python3.6
sudo apt install python3.6-dev
sudo apt install python3.6-venv
sudo apt-get install python3-distutils
sudo apt-get install build-essential
wget https://bootstrap.pypa.io/get-pip.py
sudo python3.6 get-pip.py
sudo ln -s /usr/bin/python3.6 /usr/local/bin/python3
sudo ln -s /usr/local/bin/pip /usr/local/bin/pip3
sudo ln -s /usr/bin/python3.6 /usr/local/bin/python

Install CryptoEye and Redis

sudo apt-get install git-core
git clone https://github.com/volkovartem77/cryptoeye.git
sudo apt install redis-server
sudo chown redis:redis /var/lib/redis

Creating virtualenv using Python 3.6

sudo pip install virtualenv
virtualenv -p /usr/bin/python3.6 ~/cryptoeye/venv
cd ~/cryptoeye; . venv/bin/activate
pip install -r requirements.txt
python configure.py
deactivate

Install & config supervisor

sudo apt-get install supervisor
sudo cp cryptoeye.conf /etc/supervisor/conf.d/cryptoeye.conf
sudo mkdir /var/log/cryptoeye
sudo mkdir /var/log/cryptoeye/websockets
sudo supervisorctl reread
sudo supervisorctl reload

Start APP

You can put all these commands at once

sudo supervisorctl start all
sudo echo LAUNCHED
sudo supervisorctl status

Usefull commands

sudo supervisorctl tail -5000 wsBinance stderr
sudo supervisorctl status
cd ~/cryptoeye; . venv/bin/activate
sudo nano /var/log/cryptoeye/wsBinance_ERR.log