JordiLazo / embedded_and_ubiquitous_systems_103056

This repository contains the code and documentation of the project carried out throughout the course of 103056 Embedded and Ubiquitous Systems at University of Lleida.

JordiLazo/embedded_and_ubiquitous_systems_103056 Issues

2.10: Write and draft the final documentation and prepare the final power point presentation of the project
Updated 2 years ago
2.9: Determine and implement the method that we will use to detect if a person is at risk or not due to their movement and heart rate
Updated 2 years ago
2.8: Adjust the code of the ESP-32 module to integrate it with FreeRTOS functions
Updated 2 years ago
2.7: Write the code for the ESP-32 + Servo motor + LCD Screen to subscribe a topic and receive the data through the test.mosquitto.org server to the LCD Screen and Servo motor
Updated 2 years ago1
2.6: Connect and test the ESP-32 module with the Servo motor and LCD Screen
Updated 2 years ago1
2.5: Modify the Plataform IoT to adjust to the parameters received by the ESP-01 + Arduino Nano 33 BLE module and check that they are received and stored in a csv file correctly
Updated 2 years ago
2.4: Write the code for the ESP-01 + Arduino Nano 33 BLE to publish a topic and send the data through the test.mosquitto.org server to the Plataform IoT
Updated 2 years ago
2.3: Connect and test the ESP-01 module with the Arduino Nano 33 BLE.
Updated 2 years ago1
2.2: Modify the Plataform IoT to adjust to the parameters received by the ESP-01 + MAX30102 heart rate sensor module and check that they are received and stored in a csv file correctly
Updated 2 years ago1
2.1: Write the code for the MAX30102 heart rate sensor to publish a topic and send the data through the test.mosquitto.org server to the Plataform IoT
Updated 2 years ago1
2.0: Connect and test the ESP-01 module with the MAX30102 heart rate sensor
Updated 2 years ago1
1.6: Write the code to be able to show the data transferred by the heart rate sensor in the LCD screen
Updated 2 years ago
1.5: Write the code to be able to move the servo
Updated 2 years ago
1.4 Write the code to be able to read the data transferred by the temperature sensor
Updated 2 years ago
1.3: Write the code to be able to read the data transferred by the heart rate sensor
Updated 2 years ago
1.2: Configure and connect components (LCD, I2C, Arduino UNO, ESP-01,Servo, Heart rate sensor, Temperature Sensor)
Updated 2 years ago
1.1: Install and set up arduino IDE search and install all necessary libraries
Updated 2 years ago
1.0: Read official documentation and manuals of the components
Updated 2 years ago