Action_power-tools_battery_adapter
3D files to transform Action's Ferm (AX power) batteries into powerbank and portables power supplies.
Supported batteries
Recommended battery connectors (from Action)
Print settings
Recommended
- Filament : PETG
- Nozzle diameter : 0.4 mm
- Layer height : 0.2 mm
- Filling : 30-50% rectilinear
- Support : required for the battery slot
Other tester settings
- Filament :
- PLA : Poor temperature resistance (avoid using it for high power application)
- ABS : Important shrinking. You might need to adjust the part using a Dremel or a heat gun to fit the battery.
- Nozzle diameter :
- 0.6 mm : You might need to adjust the part using a Dremel or a heat gun to fit the battery.
Files
Battery slots and Boxes are linked together using 4x M3x25 screw
1 Battery
| Part | STL | STEP | Preview |
|---|---|---|---|
| Template | STL File | STEP File |  |
| XT60 | STL file | Step file |  |
| Box template | STL file | Step file |  |
| Box 2USB | STL file | Step file |  |
Build instructions (1 battery 2 USB)
2 Batteries
Example
| Part | STL | STEP | Preview |
|---|---|---|---|
| Template | File | File |  |
| XT60 | STL file | Step file |  |
| Box template | STL file | Step file |  |
| Box 2USB | STL file | Step file |  |
This project is adapted from the following file