JochiSt / OpenFlowMeter_ThermalSimulation

Thermal Simulations using ELMER of the OpenFlowMeter

Thermal Simulations for the Open Flow Meter

Pre-Setup

In order to run the simulations contained inside this repository, [ELMERFEM] (http://www.elmerfem.org/) must be installed.

Install ELMER FEM

The easiest way of installing ELMER FEM is compiling it from the source code.

cd ~/Downloads
mkdir elmer
cd elmer
git clone https://www.github.com/ElmerCSC/elmerfem.git
cd elmerfem
mkdir build
cd build
cmake -DWITH_ELMERGUI:BOOL=FALSE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../../install ../
make -j install

For a convinient usage add the installation directory to PATH in your .bashrc

# ELMER FEM
export ELMER_HOME=$HOME/Downloads/elmer/install/
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ELMER_HOME/lib
export PATH=$PATH:$ELMER_HOME/bin

Now ELMER FEM should be ready for usage. In case you want to look at the simulation output, Paraview is one software, you can use. It can be installed via sudo apt install paraview.

ELMER GUI

For the ElmerGUI, QT5 is needed.

sudo apt install qt5-default qtscript5-dev libqwt-qt5-dev libqt5svg5-dev

Go to the build folder and redo the cmake configuration

Setup

Setup a virtual python environment and install the required packages via

pip install -r requirements.txt