NOTE: Galileo 2 Extruder is currently at RELEASE status. G2SA and G2Z/G2ZXL are still PUBLIC BETA pending some further testing.
Here you will find all of the files for the Galileo 2 projects, including a Voron Stealthburner drop-in Extruder (G2E), Z-Drives (G2Z) for V2-style printers (including V2, Micron, etc.), and a Standalone Extruder (G2SA) with mounting options for Orbiter-2.0-style or Sherpa-Mini-style mounts.
For those that are curious about what Galileo 2 offers over Galileo 1, here's a short list of benefits:
- Galileo 2 is a full redesign, moving to a 9:1 gear ratio and optimizing the gearbox design over Galileo 1. No parts from Galileo 1 are reused with Galileo 2.
- Custom 9T stepper with a taller spur gear resulting in 20% higher contact surface area than existing 10T stepper designs, resulting in better wear characteristics and power transfer.
- Proper meshing of gears due to number of stepper teeth being divisible by number of planets (9T sun / 3 planets), which gives even loading on the planets / sun gear and improves wear characteristics and power transfer. Previous designs with 10T steppers had uneven loading on the planet gears.
| Reseller | Location | Website |
|---|---|---|
| Fabreeko | USA | G2E & G2Z |
| West3D | USA | G2E & G2Z |
| Filastruder | USA | G2E / G2Z |
| DFH | USA | G2E / G2Z |
| KB-3D | USA | G2E / G2Z / G2Z x4 Kit |
| Sparta3d | Canada | G2E / G2Z |
| 3dlabtech | Canada | G2E / G2Z |
| Dremc | Australia | G2E / G2Z |
| PhaserFPV | Asutralia | G2E & G2Z |
| Uniqueprints | Australia | G2E / G2Z |
| OneTwo3d | UK | G2E / G2Z |
| 3DO | Denmark | G2E / G2Z |
| 3Dparts | Austria | G2E |
| Lecktor | Estonia | G2E |
| Zen3d | Hungary | G2E / G2Z |
| Lab4450 | Portugal | G2E / G2Z |
| Levendig dsgn | Netherlands | G2E |
| Jacks Filament | Germany | G2E |
| Alchemy3d | Germany | G2E |
| replimat | Germany | G2E |
| SWBAC | Kuwait | G2E |
| Sugoi3d | Japan | G2E |
| Trianglelabs | Global | G2E & G2Z |
| Mellow | Global | G2E & G2Z |
You must update both the gear_ratio and rotation_distance in your Klipper configuration and do a standard extruder calibration after installing the Galileo 2 Extruder. Additionally, your run_current will need to be updated.
[extruder]
rotation_distance: 47.088
gear_ratio: 9:1
microsteps: 16
[tmc2209 extruder]
run_current: 0.6You must update both the gear_ratio and rotation_distance in your Klipper configuration after installing the Galileo 2 Z Driver. Additionally, your run_current will need to be updated.
[stepper_z]
rotation_distance: 40
gear_ratio: 9:1
microsteps: 32
[tmc2209 stepper_z]
run_current: 0.8
