JadKHaddad / esp32-s3-rust-axum-example

Tokio + Axum running on ESP32-S3

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Rust + Tokio + Axum on ESP32-S3

This is an example application that demonstrates how to use Rust, Tokio and Axum to build a web server on the ESP32-S3 microcontroller.

Quick Start

You'll need tools:

  • espup - a tool to install the ESP32 toolchain and other tools
  • cargo-espflash - a tool to flash the ESP32
cargo install espup cargo-espflash
espup install

Build and run

  1. Set the WiFi credentials as environment variables. They will be baked into the executable at build time.
    • WIFI_SSID
    • WIFI_PASS
  2. This command builds the project and flashes it to the ESP32-S3:
    cargo espflash flash --release --monitor 

Test it

Once the ESP32-S3 is connected to your network, it displays the IP address on the serial console. The server runs on port 80.

$ curl http://192.168.0.24/state | jq
{
  "counter": 940,
  "free_heap": 216452,
  "ip_address": "192.168.0.24",
  "mac_address": "DC:DA:0C:2A:26:C8",
  "message": "Hello from ESP32!"
}

But is it any good?

I mean, this is strapping rockets to a bicycle.

It works if you don't overload it. The ESP32-S3 is a microcontroller with limited resources. The web server can only handle a few requests at a time before it runs out of memory.

Ballpark numbers

  • 5 concurrent requests
  • 50 requests per second

If I go over ~5 concurrent requests, IDF runs out of memory and crashes.

Axum wasn't designed for microcontrollers to put it mildly. It's actually a miracle it works at all. I did this for science. We do what we must because we can.

Alternatives

Besides Axum, Warp also works. It uses somewhat less memory, so you can maybe throw a few more requests at it.

At the time of writing this, Rocket and Actix-web don't work since they require Tokio's rt-multi-thread feature which doesn't compile on EPS32 yet.

Honestly, just use MQTT or something. It's a microcontroller, not a server.

Other ESP32 chips

See .cargo/config.toml for the list of supported chips. Set the target to the chip you're using.

Acknowledgements

This project is heavily inspired by Sami J. Mäkinen's esp32temp. Thanks for figuring out how to make this work!

License

Whatever.

About

Tokio + Axum running on ESP32-S3


Languages

Language:Rust 100.0%