SAMTOOL is a simple command-line program used to read/write to hardware locations in an IA based system: - MMIO (memory-mapped IO) - PCI - IO - MSR The tool does not require a driver. Static Executable included in download. The tool can usually be run after the following command is executed: chmod 755 samtool Alternatively, the program can be compiled. Two libraries must be installed prior to compile. Libraries: sudo apt-get install libpci-dev sudo apt-get install msr-tools Required Files: samkit.c samkit.h samtool.c code_block_read.h code_block_write.h Compile: gcc -Wall -W -Werror -g samtool.c samkit.c -lpci -lm -o samtool Run (help Example): sudo ./samtool ?