InfinityMod/fritzbox7412_openwrt_bin

Explenation

Openwrt firmware for Fritz!Box 7412.
For flashing back the original AVM firmware an initramfs-image is additionaly included.

Credits to:

 .-----.
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
        |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------

OpenWrt binarys are build from:
commit-id: 9af2735734fce61eaf9bdb49fff218e6548af6f2 (27.04.2019)
repo: https://git.openwrt.org/openwrt/openwrt.git

  A)aa   V)    vv  M)mm mmm 
 A)  aa  V)    vv M)  mm  mm 
A)    aa V)    vv M)  mm  mm 
A)aaaaaa  V)  vv  M)  mm  mm 
A)    aa   V)vv   M)      mm 
A)    aa    V)    M)      mm

AVM binarys are from firmare release:
product: FRITZ!Box 7412
version: FRITZ!OS 6.85

Usage

Install OpenWrt

Flash OpenWrt into Router Ram

Directly connect the router to lan.
Set ethernet adapter to static:
IP-Address: 192.168.178.10
Subnetmask: 255.255.255.0
Open shell and navigate to the project folder of this repository.
Unplug and plug in power connector of the router to reset the device.
Flash OpenWrt to the routers ram after the connection is initialy established:
```
bash ./flash_initramfs_openwrt.sh
```
Flashing will be proceed if the router restarts from its own and no exception is shown, otherwise begin from 3)

Persistant install OpenWrt

(Credits to: patch, sysupgrade)

After router has restarted change your ethernet adapter to:
IP-Address: 192.168.1.70
Subnetmask: 255.255.255.0
Connect in shell to OpenWrt router system:
```
ssh 192.168.1.1 -l root
```

Run via the router shell:

fritz_tffs_nand -d /dev/mtd1 -n linux_fs_start

If command responses "0" proceed with the next step. Otherwise power off the router and perform a router update via the webinterface. Restart at 1) to load OpenWrt again into ram.

In a new shell window run this command to transfer the sysupgrade binary to the router:

scp /path/to/openwrt-lantiq-xrx200-avm_fritz7412-squashfs-sysupgrade.bin root@192.168.1.1:/root/openwrt-lantiq-xrx200-avm_fritz7412-squashfs-sysupgrade.bin

Install OpenWrt on the NAND flash via your routers shell:

sysupgrade -v ./openwrt-lantiq-xrx200-avm_fritz7412-squashfs-sysupgrade.bin

Install Luci on OpenWrt

Modify distfeeds.conf at

vi /etc/opkg/distfeeds.conf

to:

src/gz reboot_core http://downloads.openwrt.org/snapshots/targets/lantiq/xrx200/packages
src/gz reboot_base http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/base
src/gz reboot_telephony http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/telephony
src/gz reboot_packages http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/packages
src/gz reboot_routing http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/routing
src/gz reboot_luci http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/luci

Perform a package update:
```
opkg update
```

Install luci packages:

opkg install luci
opkg install luci-ssl

Flash original AVM Firmware back

Directly connect to the router via lan. Set ethernet adapter to static:
IP-Address: 192.168.178.10
Subnetmask: 255.255.255.0
Open shell and navigate to the project folder of this repository.
Unplug and plug in power connector of the router to reset the device.
Flash the AVM firmware to the routers ram after the connection is established:
```
bash ./flash_initramfs_avm.sh
```
Flashing will be proceed if the router restarts from its own and no exception is shown, otherwise begin from 3).
Do not power off the device! and wait until the connection is established and the AVM webinterface of the router shows up.

InfinityMod / fritzbox7412_openwrt_bin