detect_bluekeep.py

Python script to detect bluekeep vulnerability - CVE-2019-0708 - with TLS/SSL support

Work derived from the Metasploit module written by @zerosum0x0 https://github.com/zerosum0x0/CVE-2019-0708

RC4 taken from https://github.com/DavidBuchanan314/rc4

Prerequisites

detect_bluekeep.py requires pyasn1 and cryptography python modules.

Install them either via

pip install -r requirements.txt

pip3 install pyasn1 pyasn1_modules cryptography

Return codes

SAFE - host appears to be not vulnerable
VULNERABLE - host is likely vunerable to CVE-2019-0708
HYBRID_REQUIRED_BY_SERVER - server requires CredSSP, which is currently not supported by detect_bluekeep.py
NO RDP - RDP not enabled on the remote host on port 3389
UNKNOWN - status is reported only in very rare cases (less than 5%). It ususally comes on protocol timeouts. Some other PoCs report UNKNOWN status even when server enforces SSL/TLS, we don't.

Changelog

Current stable version is 0.13

Added handling of x509 certificates. Fixed issue #3

Do not use version 0.9 and 0.10, they are broken, while doing experiments on issue #3

Added in version 0.6 - 4.5.2019

Fall back to standard RDP security if SSL/TLS is not supported by the server.

Added in version 0.5 - 4.5.2019

The scripts now supports SSL/TLS security, which is enabled by default. If you want to use the standard RDP security, use the --notls commandline parameter.

Added in version 0.1 - 3.5.2019

some RDP PDU annotations
decryption of the server traffic.
properly packetized server to client traffic, including fast path traffic

Commandline parameters

# ./detect_bluekeep.py
usage: detect_bluekeep.py [-h] [--version] [-d] [--notls] [-l [LOGFILE]] [-w WORKERS]
                          [host [host ...]]

positional arguments:
  host                  List of targets (addresses or subnets)

optional arguments:
  -h, --help            show this help message and exit
  --version             show program's version number and exit
  -d, --debug           verbose output
  --notls               disable TLS security
  -l [LOGFILE], --logfile [LOGFILE]
                        log to file
  -w WORKERS, --workers WORKERS
                        number of parallel worker tasks

Running

You may run with a list of IPv4 addresses:

# ./detect_bluekeep.py 192.168.158.241 192.168.158.242 192.168.158.247 192.168.162.73 192.168.162.70
2019-06-03 09:58:01,255 'Starting ./detect_bluekeep.py'
2019-06-03 09:58:01,255 './detect_bluekeep.py 192.168.158.241 192.168.158.242 192.168.158.247 192.168.162.73 192.168.162.70'
2019-06-03 09:58:01,256 'Going to scan 5 hosts, in 300 parallel tasks'
2019-06-03 09:58:01,366 '[-] [192.168.162.73] Status: Unknown'
2019-06-03 09:58:02,222 '[+] [192.168.158.241] Status: Vulnerable'
2019-06-03 09:58:02,887 '[+] [192.168.158.242] Status: Vulnerable'
2019-06-03 09:58:06,262 '[-] [192.168.162.70] Status: No RDP'
2019-06-03 09:58:06,262 '[-] [192.168.158.247] Status: No RDP'

or for whole subnets:

# ./detect_bluekeep.py 192.168.158.241/24 192.168.162.70/28

License

Apache 2.0

HynekPetrak / detect_bluekeep.py