This is an Open-Source Ninebot and Xiaomi compatible scooter interface app. THIS TOOL IS ONLY FOR USE ON DEVICES YOU OWN!!! It is still being added to but is in a functional state. This application is written in Python3. To install required libraries, run the following two commands: git clone --recursive https://github.com/HelaFaye/NineRiFt-Pro.git (log in to contributor account) pip install -r requirements.txt To build for Android read up on Buildozer. After that, you can either run NineRiFt on your Windows, Mac, or Linux machine by opening main.py using your Python3 interpreter or you can use a prebuilt APK for Android (you could also compile a build if you want). On Android, BLE and TCP-Serial is supported. On, Windows, Mac, and Linux, BLE, Serial, and TCP is supported. LOTHEAN OF SCOOTERHACKING.ORG KNOWINGLY AND WILLFULLY HOBBLED MY APP BY DISABLING THE FIRMWARE REPO WITHOUT PRIOR NOTICE AND I LOST MY SIGNING KEY FOR THE GOOGLE PLAY LISTING, SO THIS DOESN'T CURRENTLY WORK The Download screen is for downloading firmware: 1. Select device you need firmware for in the dropdown on the left 2. Select the firmware version you need 3. Click "Download it!" and wait for download to complete LOTHEAN OF SCOOTERHACKING.ORG KNOWINGLY AND WILLFULLY HOBBLED MY APP BY DISABLING THE FIRMWARE REPO WITHOUT PRIOR NOTICE AND I LOST MY SIGNING KEY FOR THE GOOGLE PLAY LISTING, SO THIS DOESN'T CURRENTLY WORK The Flash screen is for flashing firmware: 1. (Optional) Type the first few digits or the full length of the MAC address of the target scooter for flashing 2. Select the interface you want to use to connect (if wired, plug it in first) 3. Select the part you wish to flash 4. Select the firmware file you want flashed to the target scooter. DO NOT SELECT AN MD5 FILE!!! THIS IS NOT THE FIRMWARE!!! 5. Click "Flash it!" and wait for flashing to complete At the moment only Segway-Ninebot SNSC, ES1, ES2, and ES4 and Xiaomi M365 and M365 Pro are supported. SNSC dashboards cannot be flashed without either TCP-Serial or Serial interface. If you appreciate my work, be sure to donate at https://PayPal.com/netrafire or any of the other options listed on my GitHub. Thank you to Informatic for their contributions to Bleak support, Python3 migration, and converting the UI to the .kv format