Gladys Zwave
Need Gladys version >= 3.9 and open-zwave installed on the machine running Gladys.
Open-Zwave is already installed in the prebuilt Gladys Raspbian image you can download on Gladys website.
If you want to use it on a classic Raspbian image, all you have to do is to :
- Install Open Zwave on it (Instructions are at the end of this README)
- Update Gladys to version >= 3.9
Installation
- Plug your Zwave USB stick on your Raspberry Pi
- Install the module in Gladys in the store
- Reboot Gladys
Usage
Go the configuration panel.
You can here configure your z-wave installation !
Install Open Zwave manually Raspberry Pi
Execute the following commands :
sudo apt-get install libudev-dev
git clone https://github.com/OpenZWave/open-zwave.git
cd open-zwave
make
sudo make install && sudo ldconfig