If you want to support me for free (and get 5 USD in new user credit) you can use my PCBWay Referral link when signing up on PCBWay
Make sure you read the License!
Flashing:
Flashing has only been tested with a GBxCart, flashing both 1MB sections requires this custom software, which is a modified version of InsideGadget's 2x2MB MBC3 software, or FlashGBX v3.2 and above.
BOM:
| Reference | Part Number | Description |
|---|---|---|
| C1 | 4x4.5mm 22uF | 22uF 16V 4x4.5 Electrolytic Capacitor |
| C2, C3, C4, C12, C13 | TCC0603X7R104J500CT | 100nF 0603 Capacitor |
| C5, C6, C7, C8, C9, C10, C11 | CC0402KRX7R7BB104 | 100nF 0402 Capacitor |
| C14, C15 | CC0603JRNPO9BN220 | 22pF 0603 Capacitor |
| R1 | RC0603JR-071KL | 1K Ω 0603 Resistor |
| D1 | Diode | Harvest D2 from original cartridge |
| J1 | B9B-ZR-SM4-TF | Camera Connector, Harvest or buy (JST ZH1.5MM 9 Pin) |
| SW1 | K3-1296S-E1 | SPDT Switch (For 2x1MB Rom Switching) |
| U1 | MAC-GBD | Harvest U1 from original cartridge |
| U2 | AM29F016 | 2MB Flash |
| U3 | FM28V100 | 1MB FRAM |
| U4 | TPRT9013-33G | 3.3V Voltage Regulator |
Makes use of djedditt's gamepak footprint
Looking for a ready to use flashcart? check out InsideGadgets custom flashcart, the Insidegadgets' PicNRec AIO
