e.g. ws2812b, and only tested with them
The Power supply is a 100-240VAC one and rated at 5v 4A, don't exceed the power of the supply. Use e.g. the WLED power calculator
As i live in germany, the pcb is only tested with 230V AC, if you supply any other voltage, be warned!
It can go up in flames, explode or kill you. It's main power!
BOM
Reference | Quantity | Value | LCSC | ALI |
---|---|---|---|---|
C1 C2 | 2 | C | C107172 | Link |
J1 | 1 | Conn_01x02_Male | C475092 | Link |
J2 | 1 | Conn_01x03_Male | C475093 | Link |
J3 | 1 | Conn_01x04_Male | C2691448 | Link |
Q1 | 1 | BSS138 | C52895 | Link |
R1 R2 R3 R4 R5 R6 R7 | 7 | 10K | C144471 | Link |
SW1 | 1 | SW_FLASH | C393938 | Link |
SW2 | 1 | SW_RESET | C393938 | Link |
U2 | 1 | AMS1117-3.3 | C5199435 | Link |
U3 | 1 | ESP8266-12E/ESP-12E | C82891 | Link |
M3 Threaded Insert | 2 | M3x5x4 | Link | |
ISO 7380-1 Screws | 2 | M3x6 | Link | |
U1 | 1 | Meanwell_MPM-20-5 | ||
USB to Serial Converter | OPTIONAL | FT232 | Link |
For the Cable Holes i added some Rubber Cable Rings with 6mm inner diameter
Assembly
- Order the pcb at e.g. pcbway or jlcpcb
- While you wait, Print the casing
- Assemble the PCB
- use a soldering iron to mount your threaded inserts in the case
- mount the rubber rings, if you brought them
- Check your usb 2 serial converter that it is set to 3.3V (any other voltage will damage the esp8266)
- use the pcb pin headers to wire up the PCB with the usb 2 serial converter
┌────────────────────┐
│ VCC GND TX RX │
│ │ │ │ ┌──┘ │
│ │ │ └─┼──┐ │
│ │ │ ┌─┘ │ │
│ ▼ ▼ ▼ ▼ │
│ VCC GND TX RX │
└────────────────────┘
-
while plugging in your usb2searial conveerter, hold down the FLASH button of the pcb
-
go to the WLED web installer and flash your board
-
setup wifi for your board
-
go to the configuration website of your board, select the led setup, the output pin is GPIO 12
-
now pull your wires through the holes in the case, wire them up to the screw terminals
-
put the pcb into the case and put the lid on it
- You can contact me via Discord "Gi7mo!#4618"
- This readme file contains Amazon Associate, Aliexpress affiliate, PCBWay affiliate links. I make a comission on qualifying purchases.
- This project does not come with any warranty, if you choose to build/use one, you are doing this at your own risk!
- Be Aware, it can go up in flames, explode, harm you or kill you. Mains power is dangerous!