G42makes / Pi-Cluster

My cluster of Pi. Config scripts.

In order to ensure I can replicate my config, I have this repo cover what is needed to get my cluster online.

First we setup a controller node:

• Raspberry Pi 3 w/ official touch screen display
• OS Raspbian Jessie: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/
• Image the SD card with the OS
• Setup WIFI and remote ssh on boot
  • enable ssh: create file 'ssh' on the root of the SD card from source machine
  • setup wifi: create 'wpa_supplicant.conf' on the SD card from the source machine
    • contents: network={ ssid="YOUR_SSID" psk="YOUR_PASSWORD" key_mgmt=WPA-PSK }
  • see: https://raspberrypi.stackexchange.com/questions/10251/prepare-sd-card-for-wifi-on-headless-pi
• boot the system and get the IP from router
  • file system should resize and reboot
  • login(ssh, but the display should be working already, i just don't assume keyboard installed)
  • change 'pi' user password: $ passwd
• and install the pre-requisites for using this repo:
  • $ sudo apt-get update
  • $ sudo apt-get install -y python-pip git python-dev libffi-dev libssl-dev sshpass
  • $ sudo pip install ansible
  • $ git clone https://github.com/G42makes/Pi-Cluster.git
  • $ sudo ./local.yml
    • this will configure the local system
    • TODO: replace this command with an 'ansible-pull' command
    • TODO: add a prompt to configure the whole cluster?