Frix-x / klippain

Generic Klipper configuration for 3D printers

Frix-x/klippain Issues

Wrong pin on MCU definition of Bigtreetech SKR2
Updated 5 days ago3
Add Smooth IS results from DangerKlipper
Updated 5 days ago1
END_PRINT macro static filter fan
Updated 6 days ago
Beacon ADXL
Updated 6 days ago1
Add the Pause at Layer Functionality for Mainsail
Updated 7 days ago2
When I am uninstall klippain all the files in config folder are gone!
Updated 8 days ago4
Add the variable adaptive_primeline to variables.cfg that can be overriden in start_print
Updated 9 days ago3
Fix filament sensor variable
Updated 10 days ago1
The install didn't work with old mainsailos
Updated 11 days ago5
Query whether the Probe is atached or not before Z Home (Klicky)
Closed 13 days ago3
Move toolhead to purge bucket position (if exists) to load filament on top of purge bucket.
Updated 14 days ago2
Lift nozzle after nozzle clean and purge
Updated 14 days ago2
Add autotap for Voron tap machines
Updated 18 days ago4
customizable END_PRINT, similar to START_PRINT
Updated 19 days ago1
Manta M8P v2.0 FAN3 pin incorrect
Updated 21 days ago
Klipper expander
Updated 22 days ago3
PARK does not take Z_OFFSET into account when calculating max_z
Updated 23 days ago1
Parking after a tall print causes Move out of range error
Updated 23 days ago1
Copy backup files to a backup folder
Closed 23 days ago3
STATUS_LEDS not called when using neopixel_caselight_effects.cfg without status_leds*.cfg
Updated a month ago17
Status LED and barf ignoring index entries for nozzle leds and logo
Closed a month ago13
FILTER_TIME not set in end_print.cfg
Closed a month ago2
Override variable for Filament Pull Back at End/Cancel of Print.
Closed a month ago2
Chamber Heat soak time under material_parameters variables.cfg
Closed a month ago4
Shake&Tune fails to install mathplotlib
Closed a month ago2
MCU List unsorted on install
Updated 2 months ago2
Change [output_pin] to [pwm_cycle_time] for PWM controlled outputs
Closed 2 months ago10
Move out of range during homing.
Closed 2 months ago4
Support multiple klipper instances
Closed 3 months ago3
Printer shuts down at the end of the print
Closed 3 months ago34
Make SAVE_CONFIG work cleanly
Updated 3 months ago26
aliase n MCU.cfg for the Fysetc ERB are wrong!
Closed 3 months ago2
Conditional Home on Park vs. Error vs. Variable
Closed 3 months ago1
Add support to Fysetc Hotkeys
Updated 3 months ago3
Failed to detect git branch & shake&tune fails to install
Closed 3 months ago5
Select the Fysetc ERB in the installer, but in the MCU.cfg the Mellow FlyERCF is inserted.
Closed 3 months ago3
Upgrade to the latest Klippain Bug?
Closed 3 months ago6
Typo in config/mcu_definitions/toolhead/LDO_Nitehawk-SB_v1.0.cfg
Closed 3 months ago1
Problem with CANCEL_PRINT call on gcode Error
Closed 3 months ago7
LDO_Nighthawk-SB Toolhead board config.
Closed 3 months ago7
Wrong probe pin for BTT_SB2209_RP2040_v1.0 when using Voron Tap
Closed 3 months ago2
X/Y axis shaper graphs not created -
Closed 3 months ago4
Enable goto purge bucket and maintenance in GUI
Closed 3 months ago
Avoid cooling hotend in extrduer_preheating
Closed 3 months ago1
Incorrect endstop pin definition for in config/mcu_definitions/mmu/BTT_MMB_CAN_v1.0.cfg (develop branch)
Closed 3 months ago1
Bambu Slicer Start Gcode
Closed 3 months ago1
Unable to install due to package hash not matching
Closed 3 months ago13
to be add in `FixMmuErrorOnPrintStart` branch
Closed 3 months ago1
Erreur Klipper
Closed 4 months ago2
Problem with PRIMELINE macro w/ stock CR-10
Closed 4 months ago3