================================================= = = = README = = ------ = = = ================================================= ******************************************************************************* File name : Reame Purpose : To describe this project. Author : XU ZAN Creation date : Sat. Oct. 20, 2012 Copyright(C) 2010 --- 2015 All rights reserved. ******************************************************************************* Project name: Renesas_MCU_uPD70F3376_Switch_Matrix_Controller Chip : Renesas V850ES/FG3 uPD70F3376 Development environment : Renesas CubeSuite+ IDE Programming language : ANSI C and Renesas assembly programming language Hareware configurator : Applilet Framwork code Auto-generator tool : Applilet Project description : To develop a MCU firmware, to implement these features and functions as below : (1). Control switch-relay-matrix, to switch ON/OFF each channel; (2). Digital OUTPUT, to drive exterior actuator; (3). Digital INPUT, to detect the state of exterior sensor; (4). Communicate with PC host through serial interface, programmable controller; (5). CAN bus transceiver and analyzer, transmitting and receiving CAN telegram, plus telegtam parsing; (6). LIN bus transceiver and analyzer, transmitting, receiving and parsing LIN telegram; (7). ADC acquiring, to measure the analogue voltage and current in the DUT circuit; (8). DAC driving, to output the DC voltage(on demand) to DUT circuit; (9). PWM waveform output, PWM stimulus output to DUT circuit; Software developer : Frédérick Hsu /*============================================================================*/ For more information, please read the source code, schematics and datasheets, refer to the "Development_Log" file.