Exo-poulpe / RSock

Simple Rust port scanner with thread

RSock

RSock is a program scan network and ip address.

Installation

This program has been tested only under linux

Download the Rust source and compile then.

Usage/Help

RSock 0.0.1.2
Exo-poulpe
Rust Socket scan network

USAGE:
    RSock [FLAGS] [OPTIONS]

FLAGS:
    -h, --help         Print this message
        --host-scan    Use target and cidr to scan host
        --port-scan    Make port scan on target
        --time         Print time elapsed
    -v, --verbose      More verbose output (slower)
    -V, --version      Prints version information

OPTIONS:
        --cidr <CIDR>         Get CIDR for IP
    -p, --port <PORT>         Set the port to use
    -t, --target <TARGET>     Set the IP to use
        --thread <THREADS>    Set number of thread

Exemple scan

Port

For example port scan:

./RSock -t 192.168.1.12 --port-scan --thread 16 --time

With this command you scan all port of the address 192.168.1.12 with 16 thread and print time elapsed for scan

Result :

Port : 80 (http ?)
Port : 667

Time elapsed : 18.45 seconds

(print only opened port with default port of protocol)

Host

For example host scan :

./RSock -t 192.168.1.1 --cidr 24 --host-scan --time

With this command you can scan all the network with CIDR number of net mask

Result :

Mask of network 255.255.255.0
Network ID 192.168.1.0
Wildcard mask in binary of network 00000000.00000000.00000000.11111111 => 0.0.0.255
Port scan start at 1 and stop at 254
192.168.1.0 / 192.168.1.255
Host found : 192.168.1.1 : true
Host found : 192.168.1.112 : true
Host found : 192.168.1.45 : true

Time elapsed : 15.082 seconds