SlowPWM

Extended Arduino library by William Koch for low frequency PWM with analog pin or a variable as input, 2 example included.

Tested on an Arduino Due & Uno R3.

Instructions

Include the library in your sketch:

#include <SlowPWM.h>

Constructors

There are 2 constructors which differ by analog resolution and an aditional one for a integer variable as control signal.

Default

This will create a SlowPWM object with a custom duty-cycle and 10bit analog resolution:

SlowPWM myPWM(1000, A1, 10);
// 1000ms duty-cycle, input pin: A1, output pin: 10

12bits Analog Resolution

The same as above, but with 12 bits analog resolution:

SlowPWM myPWM(1000, A1, 10, 12);
// 1000ms duty-cycle, input pin: A1, output pin: 10, 12bits.

8bit integer variable Resolution

This will create a SlowPWM object with a custom duty-cycle and 8bit resolution controlled by an integer variable:

int inputPWM;
SlowPWM myPWM(1000, &inputPWM, 10);
// 1000ms duty-cycle, input variable: inputPWM, output pin: 10.

Functions

SlowPWM has 3 functions.

on()

Starts the PWM the first time it is called, and calls update() automatically.

myPWM.on();

update()

Updates everything inside the library. If you already started your PWM with on(), it will do the PWM until you call stop(). The output will be ON/OFF according to the value on the input. If you adjust the input to 10% with a potentiometer, your output will be on for 10% and off for 90% of the duty-cycle time.

myPWM.update();

off()

Stops the PWM;

myPWM.off(); // Turns everything off.

EugenZimmermann / SlowPWM