Enchan1207 / cmake-xc8

CMake XC8 Compiler toolchain

cmake-xc8

Overview

CMake toolchain for PIC microcontroller (with XC8 C Compiler)

Usage

You can use this toolchain by some ways:

1. Configure project only for PIC (always use toolchain when build project)
2. Configure project for cross-platform software (use toolchain only if build for PIC)

Before you use...

This repository depends on MPLAB X IDE and MPLAB XC8 Compiler.

1. Always use toolchain when build project

If you always want to use XC8 toolchain, please insert following lines into CMakeLists.txt.

NOTE: Please insert them before project() statement!

# fetch and enable PIC XC8 toolchain
include(FetchContent)
FetchContent_Declare(
    xc8_toolchain
    GIT_REPOSITORY https://github.com/Enchan1207/cmake-xc8
    GIT_TAG v1
)
FetchContent_Populate(xc8_toolchain)
set(CMAKE_TOOLCHAIN_FILE "${xc8_toolchain_SOURCE_DIR}/cmake/xc8_toolchain.cmake")

2. Use toolchain only if build for PIC

If your project is developed as cross-platform software, add --toolchain= options to cmake when configure.

cmake .. --toolchain=/path/to/xc8_toolchain.cmake

It can be able to build your project for PIC without making any changes to CMakeLists.txt.

Custom macros

This toolchain provides custom macros named target_configure_for_pic(). It can use like this:

add_executable(main)
target_sources(main PRIVATE
    main.cpp
)

# If your project is not only for PIC,
# please check if BUILD_FOR_PIC is defined and its value is `true`
if(${BUILD_FOR_PIC})
    target_configure_for_pic(main)
endif()

This macro adds the following custom targets and commands to your target:

• Flash target:
  Custom target named flash-{target_name} for flashing. If you execute this target, built programms will be flashed to microcontroller by ipecmd.jar (command-line tool included in MPLAB IPE).

Variables

You can specify some options to cmake-xc8. These can be checked and edited using ccmake, cmake-gui or command-line options.

• Environment options:
  • XC8_INSTALL_DIR: Optional
    Root path of XC8 compiler. If you installed XC8 to custom directory, you need to set this.
  • MPLABX_INSTALL_DIR: Optional
    Root path of MPLAB X IDE. If you installed IPE to custom directory, you need to set this.
• Compiler options:
  • PIC_MCU: Required
    The identifier of target microcontroller.
  • PIC_FCPU: Required
    The clock frequency of target microcontroller.
• Programmer options:
  • IPE_TOOL: Optional
    Flash tool identifier. If you want to use PICKit 3, specify PPK3.

License

This repository is published under MIT License.