EliasKotlyar / Subaru-SSM2-Torque-Adapter

Adapter which translates the propriatary SSM Protocol to Torque Protocol

Subaru-SSM2-Torque-Adapter

This project aims to add support for Torque on older Subaru using cheap of the shelf hardware

Hardware

Simple K/D-Can Cable used for BMWs slightly modified see Hardware.

Flashing Process

1. Install https://github.com/MCUdude/MajorCore
2. Connect to the Atmega162 using connection diagram
3. Set Clock Frequency to 7.3728 Mhz
4. Install Firmware/Bootloader to the board

Credits

Based on https://github.com/matprophet/subduino