Dushistov / chronos

Chronos: multiple simultaneous countdown / countup timers in Emacs.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Chronos

MELPA GPL3

Whats New

Version 1.3 added the ability to quickly choose a timer 'M-x chronos-select-timer' or s key, for this it is necessary to fill in the chronos-standard-timers variable.

  (setq chronos-standard-timers
        '("Green Tea (Short)            2/Green Tea: Remove tea bag"
          "Timebox                     25/Finish and Reflect + 5/Back to it"
          "Break                       30/Back to it"))

and add possibility to reset timers.

Version 1.2 (Internal) allows entry of multiple cumulative timers, e.g. 'M-x chronos-add-timers-from-string' 25/Pomodoro: Work on helm-chronos + 5/Pomodoro: Rest will add two timers: one to go off in 25 minutes and one to go off in 30 (=25+5).

Version 1.1 (Internal) has extra configuration options and a revamped notification system using the hook chronos-expiry-functions.

If you are upgrading from v1.0, you might need to change your configurations if you referred to chronos-shell-notify-command (which has been split into chronos-shell-notify-program and a list of strings chronos-shell-notify-parameters) or chronos-action-function (which has become the hook chronos-expiry-functions).

Also, new notification methods have been added to:

  • Play a wav file with Emacs' built in play-sound (requires Emacs to be built with sound support).
  • Send a desktop notification (requires Emacs built with libnotify plus a system with dbus, consolekit and a notification daemon).
  • Tell you when and what expired using a text to speech program (requires a program like espeak).

Introduction

Chronos provides multiple countdown / countup timers, updated every second, shown sorted by expiry time in the special buffer *chronos*.

The *chronos* buffer might look like:

     Expiry      Elapsed      To go  Message
     [17:02]                         --now--
     [17:07]           9       4:51  Coffee

In this example, the time 'now' is 17:02. A five minute countdown timer was set up 9 seconds ago. It is expected to expire in 4 minutes 51 seconds at 17:07.

Various notification methods are available. Here is a picture of the in-buffer notification method, which puts the message of an expired timer in the chronos-notification face for chronos-notification-time seconds.

Example of in-buffer notification

Motivation

There are a number of Emacs packages that provide timer functionality, such as job tracking, alarms or a countdown timer in the mode line. However, I wanted one that showed multiple simultaneous countdown and countup timers in a specific buffer.

Possible use cases include:

  • Cooking timers (what I use it for most often).
  • Presentation timers (when to start wrapping up, when to start questions etc.).
  • Timing how long something takes (on a scale of seconds to hours).

Installation

Old school

Put chronos.el somewhere Emacs can find it and evaluate:

 (require 'chronos)

MELPA

If you have set up access to MELPA http://melpa.org/#/getting-started, you can install using:

 M-x package-install chronos

MELPA/use-package

If you have MELPA and use-package https://github.com/jwiegley/use-package, you can install by evaluating:

 (use-package chronos :ensure t)

Add that snippet to your init file if you want chronos for future sessions.

Quick start

M-x chronos-add-timer will start chronos and prompt you to add a timer. When prompted for the time, enter an integer number of minutes for the timer to count down from (see later for more sophisticated options). When prompted for the message, enter a short description of the timer for display and notification.

Alternatively, you can use M-x chronos-add-timers-from-string. This function prompts for a string, from which one or more timers can be parsed. See the section Add timers from string.

Dependencies

Chronos should work on a stock Emacs install.

When a timer expires, various functions can be run to notify the user. Some of these can require particular builds of Emacs or system features. See the notifications section later.

Enhancements

There is a helm interface for conveniently adding timers: helm-chronos.

See https://github.com/dxknight/helm-chronos

Configuration

No configuration is required, but the defaults can be customized with M-x customize-group chronos or set in your init file.

You may wish to bind chronos-add-timer, set the notification functions and change the faces used in the chronos buffer.

Expiry time specification

The expiry time specification can be absolute or relative. Relative times are with respect to a base time that, depending on circumstances, could be:

  • current time, or
  • the expiry time of another timer

absolute time

Start with an =, followed by a 24+hr clock time. For example, =17:00 is an expiry time of five o'clock in the afternoon. Times are for the current day. If you want to refer to times tomorrow (i.e. past midnight), add 24 hours: e.g. =25:30 specifies 1:30 tomorrow morning.

relative time

Up to three numbers can be given, separated with colons :. A minus - can be prepended to indicate negative times.

  • No numbers (or all zeros) - the base time

  • One number - minutes

  • two numbers - hours and minutes and

  • three numbers - hours minutes and seconds.

Positive numbers indicate later expiry, negative ones earlier.

For example, if the base time is 17:00:

  • 5 gives an expiry time of 17:05
  • 1:30 gives 18:30
  • 0:0:30 gives 30 seconds after 17:00
  • empty or 0 gives a count up timer starting now, at 17:00.

Negative relative times are more useful against existing timers. Here, a timer was set for the absolute time 19:00, then with the cursor on this timer and using (C-u a), two relative timers were set to expire earlier, one with -5 (five minutes before end, i.e. 18:55) and the other with -15 (fifteen minutes before end, i.e. 18:45).

Expiry      Elapsed      To go  Message 
[18:04]                         --now--
[18:45]          45      41:10  Any questions
[18:55]          58      51:10  Thanks and goodbyes
[19:00]        2:01      56:10  Talk ends

Add timers from string

Although mainly useful for the helm-chronos helm interface, chronos-add-timers-from-string parses a single string to set up one or more consecutive timers. If the first timer in the string has a relative expiry time, this is relative to current time or, with the prefix argument, to the currently selected timer. Subsequent timers are relative to the previous timer in the string.

The format of the string for a single timer is <expiry specification>/<message>. You can delimit multiple consecutive timers with +.

For example, you could enter a pomodoro style timer with:

 25/Pomodoro: Work on helm-chronos + 5/Pomodoro: Rest

which will give a timer to go off in 25 minutes and another in 30 (=25+5) minutes:

 Expiry      Elapsed      To go  Message
 [13:10]                         --now--
 [13:35]                  25:00  Pomodoro: Work on helm-chronos
 [13:40]                  30:00  Pomodoro: Rest

A more complex example might be

 =17:00/Drink coffee + -5/Brew coffee + -5/Boil kettle + 25/Finish break

Which will give a timer at 5 o'clock to drink coffee, a timer five minutes before that (16:55) to start brewing the coffee, a reminder five minutes before that (16:50) to put the kettle on and a reminder 25 minutes after that (17:15) to finish drinking coffee and get back to work.

 Expiry      Elapsed      To go  Message
 [13:19]                         --now--
 [16:50]                3:30:46  Boil kettle
 [16:55]                3:35:46  Brew coffee
 [17:00]                3:40:46  Drink coffee
 [17:15]                3:55:46  Finish break

Controls

In the *chronos* buffer, new timers can be added, selected, paused, unpaused, lapped, adjusted or deleted. Default keybindings in this buffer are:

Key Action
a add a timer by specifying expiry time and a message
A add multiple consecutive timer(s) in one go
n/p move selection down/up (also C-n/C-p <down>/<up>)
SPC pause/unpause (pausing affects time to go and the expiry time, but not elapsed time)
d delete selected timer
D delete all expired timers
e edit selected timer
l lap selected timer
F freeze/unfreeze the display
q quit window
r reset timer
s select timer

Whether relative times are against current time or the expiry time of the selected timer is controlled by the prefix.

  • Adding a timer with a is relative to current time; (C-u a) will calculate expiry times relative to the selected timer.

  • Editing (adjusting) the selected timer with e will calculate times relative to the currently set expiry time of that timer. (C-u e) will calculate relative times against the current time.

Add a timer

Adding a timer with a in the *chronos* buffer is the same as adding a timer with M-x chronos-add-timer.

Adding with A is the same as M-x chronos-add-timers-from-string.

Move selection

A timer is selected when the cursor is on its line. The cursor can be moved down and up the timer list, wrapping as necessary, with n and p (also C-n, C-p, <down> and <up>).

The -now- timer can be selected, but cannot be paused, lapped or deleted.

Pause/Unpause

SPC pauses a running timer and unpauses a paused one. Pausing a timer halts the time to/since expiry and pushes back the expected expiry time. The time elapsed since setting up the timer continues to increase. The timer is displayed in the chronos-paused face

Deleting timers

The selected timer can be deleted with d. Alternatively, all expired timers can be deleted with D. Once deleted, they're gone.

Editing timers

When editing a timer, you will be prompted for an expiry time specification like used when adding a new timer. If the edit is started with e, the new expiry time will be calculated relative to the timer's existing expiry time. If the edit is called with a prefix C-u e, the new expiry time will be relative to the current time.

You will also be prompted for a message, using the existing message as a starting point.

Lap timers

When a timer is lapped by pressing l:

  • The timer is paused and the time that had elapsed until the timer was lapped is appended to the message. If the message does not already include a lap number, <1> is inserted in the message.

  • A new timer with the message <n+1> is run continuing on from the one just lapped.

Lap example

For example, a countup timer was set with Time:0 and Message:Lap timer example.

After running for six seconds, the timer was lapped with l. Eight seconds later, the timer was lapped again, then after five seconds and then four. These lap times, together with lap numbers in <> were appended to the messages. There is no lap time for lap 5, as that timer hasn't been lapped yet.

The 'To go' column gives the total elapsed time, e.g. the first four laps took 23 seconds.

The Elapsed column gives how long since the lap started - e.g. lap 2 started 24 seconds ago.

 Expiry      Elapsed      To go  Message
 [11:50]           7         30+ Lap timer example <5>
 [11:50]          11         23+ Lap timer example <4>       4
 [11:50]          17         19+ Lap timer example <3>       5
 [11:50]          24         14+ Lap timer example <2>       8
 [11:51]          30          6+ Lap timer example <1>       6
 [11:51]                         --now--

Freezing the display

Freezing the display with F prevents any updates to the *chronos* buffer or triggering of expiry actions, but does not stop the timers running. Unfreezing the display with F again updates the *chronos* buffer to current values and triggers all outstanding actions.

Quitting, Killing and restarting

Quitting with q buries the *chronos* buffer, but timers continue to run. Switch back to the *chronos* buffer when required.

Killing the *chronos* buffer in the usual way (typically C-x k) deletes any timers (after user confirmation) and closes the buffer. To restart after a kill, use M-x chronos-add-timer.

Notifications

By default, expired timers are shown above the -now- line, highlit with the chronos-expired face, until they are deleted. Additional actions can be set for when a timer expires by adding functions to the hook chronos-expiry-functions.

Countup timers (those started with 0 time to expire) do not trigger these notifications, although they are highlit with the chronos-expired face.

If an unexpired timer is edited so that its expiry time is now in the past, no notification will be triggered. Conversely, adjusting an expired timer so that its expiry time is now in the future will trigger any notifications when the timer expires.

chronos-expiry-functions

The hook chronos-expiry-functions is empty by default so it can be set directly as a list of functions, or add-hook can be used to add functions to it in the standard way.

This hook is "abnormal", in that all functions added must take an argument: the expired timer.

Standard functions available are:

Function Action
chronos-message-notify Issues a message to the echo area and *Messages* buffer
chronos-sound-notify Plays chronos-notification-wav (if Emacs compiled with sound support and the specified wav file exists).
chronos-desktop-notifications-notify Sends a desktop notification (if Emacs compiled with libnotify support and running in a dbus / consolekit / notification environment).
chronos-buffer-notify Displays the timer's message in the *chronos* buffer, in thechronos-notification face for chronos-notification-time seconds.
chronos-shell-notify Runs chronos-shell-notify-program (if it exists) with parameters chronos-shell-notify-parameters.
chronos-dunstify Uses the dunst notification daemon (requires dunst and dbus but not consolekit).
chronos-text-to-speech-notify Uses chronos-text-to-speech-program (such as espeak) with chronos-text-to-speech-program-parameters to speak the expiry time and message.

For example, in my init file I have:

    (setq chronos-shell-notify-program "mpv"
          chronos-shell-notify-parameters '("--really-quiet"
                                            "--af=scaletempo=speed=pitch"
                                            "--speed=0.65"
                                            "~/wip/progs/cdt/temple-bell-zen.mp3")
          chronos-text-to-speech-program "espeak"
          chronos-text-to-speech-program-parameters "-s 100"
          chronos-expiry-functions '(chronos-dunstify
                                     chronos-buffer-notify
                                     chronos-shell-notify
                                     chronos-text-to-speech-notify))

This sets the notification sequence to pop up a dunst notification, put the message in the *chronos* buffer in big text, run mpv in the shell with various parameters to give a slowed down temple bell and then speak the time and message with espeak.

About

Chronos: multiple simultaneous countdown / countup timers in Emacs.

License:GNU General Public License v3.0


Languages

Language:Emacs Lisp 100.0%