DrAma999 / LittleBlueToothTestApp

Test application for LittleBlueTooth iOS library

LittleBlueToothTestApp

Test application for LittleBlueTooth iOS library

Installation

• Clone the repo
• Download the LightBlue application for macOS or iOS
• Go into Virtual Devices tab press on + select Heart Rate and press Save, now you have a simulated hearth rate monitor
• Build and run the project on a device
• Tap on Connect and on Listen and you will see the heart rate change from time to time

NOTE Before reading the sensor position you must set a value inside the LightBlue sensor simulation, to do that select the simulated peripheral, scroll down to the Body sensor location select and where is written no value put and hex value from 0x00 to 0x06

About LittleBlueTooth

You can download the full project here.