The purpose behind Hack-Moji is to use a fun a stimulating way of learning computer programming for my children Hamiltonian and Valerian.
I will add fun and useful examples here as I go.
These examples are taken from the Brainfuck wikipedia article.
This is the classic "Hello World!" example from so many programming languages.
runme("++++++++[>++++[>++>+++>+++>+<<<<-]>+>+>->>+[<]<-]>>.>---.+++++++..+++.>>.<-.<.+++.------.--------.>>+.>++.")addtwo = """
, Input first number
------------------------------------------------ Make the number character into a real number
> Move to cell 1
, Input second number
------------------------------------------------ Remove 48 from character
< Move to cell 0
[>+<-] Loop where we decrease the number in cell 0 and increase in cell 1
> Move to cell 1
++++++++++++++++++++++++++++++++++++++++++++++++ Convert the number to a character number
. Print the result
"""
runme(addtwo)This example produces 7 by adding 5 + 2.
addme = """
++ Cell c0 = 2
> +++++ Cell c1 = 5
[ Start your loops with your cell pointer on the loop counter (c1 in our case)
< + Add 1 to c0
> - Subtract 1 from c1
] End your loops with the cell pointer on the loop counter
At this point our program has added 5 to 2 leaving 7 in c0 and 0 in c1
but we cannot output this value to the terminal since it is not ASCII encoded!
To display the ASCII character "7" we must add 48 to the value 7
48 = 6 * 8 so let's use another loop to help us!
++++ ++++ c1 = 8 and this will be our loop counter again
[
< +++ +++ Add 6 to c0
> - Subtract 1 from c1
]
< . Print out c0 which has the value 55 which translates to "7"!
"""
runme(addme)mycode = """
-,+[ Read first character and start outer character reading loop
-[ Skip forward if character is 0
>>++++[>++++++++<-] Set up divisor (32) for division loop
(MEMORY LAYOUT: dividend copy remainder divisor quotient zero zero)
<+<-[ Set up dividend (x minus 1) and enter division loop
>+>+>-[>>>] Increase copy and remainder / reduce divisor / Normal case: skip forward
<[[>+<-]>>+>] Special case: move remainder back to divisor and increase quotient
<<<<<- Decrement dividend
] End division loop
]>>>[-]+ End skip loop; zero former divisor and reuse space for a flag
>--[-[<->+++[-]]]<[ Zero that flag unless quotient was 2 or 3; zero quotient; check flag
++++++++++++<[ If flag then set up divisor (13) for second division loop
(MEMORY LAYOUT: zero copy dividend divisor remainder quotient zero zero)
>-[>+>>] Reduce divisor; Normal case: increase remainder
>[+[<+>-]>+>>] Special case: increase remainder / move it back to divisor / increase quotient
<<<<<- Decrease dividend
] End division loop
>>[<+>-] Add remainder back to divisor to get a useful 13
>[ Skip forward if quotient was 0
-[ Decrement quotient and skip forward if quotient was 1
-<<[-]>> Zero quotient and divisor if quotient was 2
]<<[<<->>-]>> Zero divisor and subtract 13 from copy if quotient was 1
]<<[<<+>>-] Zero divisor and add 13 to copy if quotient was 0
] End outer skip loop (jump to here if ((character minus 1)/32) was not 2 or 3)
<[-] Clear remainder from first division if second division was skipped
<.[-] Output ROT13ed character from copy and clear it
<-,+ Read next character
] End character reading loop
"""
runme(mycode)