Daniel Loranger's repositories
svxlink-sounds-en_US-laura-v2
svxlink sounds
DL-openrepeater
This is where web application files live for the OpenRepeater Project. The OpenRepeater web application is a front end interface to the svxlink core system and builds the appropriate configuration files needed for operation.
dtmfdecoder
control software for hardware DTMF decoder module for the ICS Control PiRepeater products
Eagle_Up_Models
3d sketchup models for use in Eagle UP utility
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
MODULE_Metar_Info
The metar information module is used to get METAR (weather) information from ICAO locations, usually airports, and announces them over the air. You can request a METAR from an airport of your interest.
Module_RigCtl
DTMF to CI-V commands for Icom IC-7100
MODULE_template
A template for users of ORP to reference when creating a new custom module
open60
Android Bluetooth client for the Mini60 antenna analyzer
orp-sounds
Sounds required by OpenRepeater for SVXLink core and modules.
pnp-feeder
An automated feeder for pick and place machines.
RPi-GPS-PPS-StratumOne
setup a Raspberry Pi as a Stratum One time server (GPS with PPS)
seeed-voicecard
2 Mic Hat, 4 Mic Array, 6-Mic Circular Array Kit, and 4-Mic Linear Array Kit for Raspberry Pi
svxlink-install-script
Svxlink install script
svxlink-sounds-en_US-heather
English language pack for SvxLink Server using voice Heather from Acapela Box