A .NET Standard library for intercepting server-side HTTP dependencies.
This library provides functionality for intercepting HTTP requests made using the HttpClient class in code targeting .NET Standard 2.0 (and later), and .NET Framework 4.6.1 and 4.7.2.
The primary use-case is for providing stub responses for use in tests for applications, such as an ASP.NET Core application, to drive your functional test scenarios.
The library is based around an implementation of DelegatingHandler, which can either be used directly as an implementation of HttpMessageHandler, or can be provided to instances of HttpClient. This also allows it to be registered via Dependency Injection to make it available for use in code under test without the application itself requiring any references to JustEat.HttpClientInterception or any custom abstractions of HttpClient.
This design means that no HTTP server needs to be hosted to proxy traffic to/from, so does not consume any additional system resources, such as needing to bind a port for HTTP traffic, making it lightweight to use.
To install the library from NuGet using the .NET SDK run:
dotnet add package JustEat.HttpClientInterception
Below is a minimal example of intercepting an HTTP GET request to an API for a JSON resource to return a custom response using the fluent API:
// Arrange
var options = new HttpClientInterceptorOptions();
var builder = new HttpRequestInterceptionBuilder();
builder
.Requests()
.ForGet()
.ForHttps()
.ForHost("public.je-apis.com")
.ForPath("terms")
.Responds()
.WithJsonContent(new { Id = 1, Link = "https://www.just-eat.co.uk/privacy-policy" })
.RegisterWith(options);
using var client = options.CreateHttpClient();
// Act
// The value of json will be: {"Id":1, "Link":"https://www.just-eat.co.uk/privacy-policy"}
string json = await client.GetStringAsync("https://public.je-apis.com/terms");HttpRequestInterceptionBuilder objects are mutable, so properties can be freely changed once a particular setup has been registered with an instance of HttpClientInterceptorOptions as the state is captured at the point of registration. This allows multiple responses and paths to be configured from a single HttpRequestInterceptionBuilder instance where multiple registrations against a common hostname.
HTTP requests to intercept can also be configured in an "HTTP bundle" file, which can be used to store the HTTP requests to intercept and their corresponding responses as JSON.
This functionality is analogous to our Shock pod for iOS.
Below is an example bundle file, which can return content in formats such as a string, JSON and base64-encoded data.
The full JSON schema for HTTP bundle files can be found here.
{
"$schema": "https://raw.githubusercontent.com/justeat/httpclient-interception/main/src/HttpClientInterception/Bundles/http-request-bundle-schema.json",
"id": "my-bundle",
"comment": "A bundle of HTTP requests",
"items": [
{
"id": "home",
"comment": "Returns the home page",
"uri": "https://www.just-eat.co.uk",
"contentString": "<html><head><title>Just Eat</title></head></html>"
},
{
"id": "terms",
"comment": "Returns the Ts & Cs",
"uri": "https://public.je-apis.com/terms",
"contentFormat": "json",
"contentJson": {
"Id": 1,
"Link": "https://www.just-eat.co.uk/privacy-policy"
}
}
]
}// using JustEat.HttpClientInterception;
var options = new HttpClientInterceptorOptions().RegisterBundle("my-bundle.json");
var client = options.CreateHttpClient();
// The value of html will be "<html><head><title>Just Eat</title></head></html>"
var html = await client.GetStringAsync("https://www.just-eat.co.uk");
// The value of json will be "{\"Id\":1,\"Link\":\"https://www.just-eat.co.uk/privacy-policy\"}"
var json = await client.GetStringAsync("https://public.je-apis.com/terms");Further examples of using HTTP bundles can be found in the tests, such as for changing the response code, the HTTP method, and matching to HTTP requests based on the request headers.
Below is a minimal example of intercepting a request to inject an HTTP fault:
var options = new HttpClientInterceptorOptions();
var builder = new HttpRequestInterceptionBuilder()
.Requests()
.ForHost("public.je-apis.com")
.WithStatus(HttpStatusCode.InternalServerError)
.RegisterWith(options);
var client = options.CreateHttpClient();
// Throws an HttpRequestException
await Assert.ThrowsAsync<HttpRequestException>(
() => client.GetStringAsync("http://public.je-apis.com"));If you are using IHttpClientFactory to register HttpClient for Dependency Injection in a .NET Core 3.1 application (or later), you can implement a custom IHttpMessageHandlerBuilderFilter to register during test setup, which makes an instance of HttpClientInterceptorOptions available to inject an HTTP handler.
A working example of this approach can be found in the sample application.
/// <summary>
/// A class that registers an intercepting HTTP message handler at the end of
/// the message handler pipeline when an <see cref="HttpClient"/> is created.
/// </summary>
public sealed class HttpClientInterceptionFilter : IHttpMessageHandlerBuilderFilter
{
private readonly HttpClientInterceptorOptions _options;
public HttpClientInterceptionFilter(HttpClientInterceptorOptions options)
{
_options = options;
}
/// <inheritdoc/>
public Action<HttpMessageHandlerBuilder> Configure(Action<HttpMessageHandlerBuilder> next)
{
return (builder) =>
{
// Run any actions the application has configured for itself
next(builder);
// Add the interceptor as the last message handler
builder.AdditionalHandlers.Add(_options.CreateHttpMessageHandler());
};
}
}Below is an example of setting up IServiceCollection to register HttpClient for Dependency Injection in a manner that allows tests to use HttpClientInterceptorOptions to intercept HTTP requests. Similar approaches can be used with other IoC containers.
You may wish to consider registering HttpClient as a singleton, rather than as transient, if you do not use properties such as BaseAddress on instances of HttpClient. This allows the same instance to be used throughout the application, which improves performance and resource utilisation under heavy server load. If using a singleton instance, ensure that you manage the lifetime of your message handlers appropriately so they are not disposed of incorrectly and update the registration for your HttpClient instance appropriately.
services.AddTransient(
(serviceProvider) =>
{
// Create a handler that makes actual HTTP calls
HttpMessageHandler handler = new HttpClientHandler();
// Have any delegating handlers been registered?
var handlers = serviceProvider
.GetServices<DelegatingHandler>()
.ToList();
if (handlers.Count > 0)
{
// Attach the initial handler to the first delegating handler
DelegatingHandler previous = handlers.First();
previous.InnerHandler = handler;
// Chain any remaining handlers to each other
foreach (DelegatingHandler next in handlers.Skip(1))
{
next.InnerHandler = previous;
previous = next;
}
// Replace the initial handler with the last delegating handler
handler = previous;
}
// Create the HttpClient using the inner HttpMessageHandler
return new HttpClient(handler);
});Then in the test project register HttpClientInterceptorOptions to provide an implementation of DelegatingHandler. If using a singleton for HttpClient as described above, update the registration for the tests appropriately so that the message handler is shared.
var options = new HttpClientInterceptorOptions();
var server = new WebHostBuilder()
.UseStartup<Startup>()
.ConfigureServices(
(services) => services.AddTransient((_) => options.CreateHttpMessageHandler()))
.Build();
server.Start();Further examples of using the library can be found by following the links below:
- Example tests
- Sample application with tests
- This library's own tests
Generated with the Benchmarks project using BenchmarkDotNet using commit c31abf3 on 02/05/2020.
BenchmarkDotNet=v0.12.1, OS=Windows 10.0.18363.815 (1909/November2018Update/19H2)
Intel Core i9-9980HK CPU 2.40GHz, 1 CPU, 16 logical and 8 physical cores
.NET Core SDK=3.1.201
[Host] : .NET Core 3.1.3 (CoreCLR 4.700.20.11803, CoreFX 4.700.20.12001), X64 RyuJIT
DefaultJob : .NET Core 3.1.3 (CoreCLR 4.700.20.11803, CoreFX 4.700.20.12001), X64 RyuJIT
| Method | Mean | Error | StdDev | Gen 0 | Gen 1 | Gen 2 | Allocated |
|---|---|---|---|---|---|---|---|
GetBytes |
3.374 μs | 0.0156 μs | 0.0146 μs | 0.4044 | - | - | 3.33 KB |
GetHtml |
3.590 μs | 0.0150 μs | 0.0133 μs | 0.3967 | - | - | 3.25 KB |
GetJsonNewtonsoftJson |
9.316 μs | 0.1269 μs | 0.1125 μs | 1.0834 | - | - | 8.95 KB |
GetJsonSystemTextJson |
7.074 μs | 0.0524 μs | 0.0490 μs | 0.6866 | - | - | 5.7 KB |
GetStream |
34.545 μs | 0.3502 μs | 0.3275 μs | 0.4272 | - | - | 3.66 KB |
RefitNewtonsoftJson |
25.978 μs | 0.1982 μs | 0.1757 μs | 1.7700 | - | - | 14.93 KB |
RefitSystemTextJson |
23.343 μs | 0.2181 μs | 0.2040 μs | 1.0986 | - | - | 9.46 KB |
Any feedback or issues can be added to the issues for this project in GitHub.
The repository is hosted in GitHub: https://github.com/justeat/httpclient-interception.git
Compiling the library yourself requires Git and the .NET SDK to be installed (version 6.0.100 or later).
To build and test the library locally from a terminal/command-line, run one of the following set of commands:
git clone https://github.com/justeat/httpclient-interception.git
cd httpclient-interception
./build.ps1This project is licensed under the Apache 2.0 license.