STM32-HAL quickstart

This repo provides a starting point for new STM32-HAL projects. It's based on the Knurling app template.

Quickstart

Install Rust.
Install the compilation target for your MCU. Eg run rustup target add thumbv7em-none-eabihf. You'll need to change the last part if using a Cortex-M0, Cortex-M33, (Eg Stm32G0 or L5 respectively) or if you don't want to use hardware floats.
Install flash and debug tools: cargo install flip-link, cargo install probe-run.
Clone this repo: git clone https://github.com/David-OConnor/stm32-hal-quickstart
Change the following lines to match your MCU. Post an issue if you need help with this:
- Cargo.toml: stm32-hal2 = { version = "^1.1.0", features = ["l4x3", "l4rt"]}
- memory.x: FLASH and RAM lines
- .cargo/config.toml: runner and target lines.
Connect your device. Run cargo run --release to compile and flash.