DancerVlt69 / sdrpp_radiosonde

Radiosonde decoder plugin for SDR++

Radiosonde decoder plugin for SDR++

Compatibility:

Manufacturer	Model	GPS	Temperature	Humidity	XDATA
Vaisala	RS41-SG	✔️	✔️	✔️	✔️
Meteomodem	M10	✔️	✔️	✔️
Meteomodem	M20	✔️	✔️
GRAW	DFM06/09/17	✔️	✔️
Meisei	iMS-100	✔️	✔️	✔️
Meisei	RS-11G	✔️	✔️	✔️
InterMet	iMet-1/4	✔️	✔️	✔️	✔️
Meteolabor	SRS-C50	✔️	✔️
Meteo-Radiy	MRZ-N1	✔️	✔️

Installing

Binary releases for Windows and Linux (both x86-64 only, built for SDR++ nightlies) are available from the Releases page.

• Windows: download the .dll file from the latest release, and place it in the modules directory within your SDR++ installation.
• Linux: download the .so file from the latest release, and place it in the /usr/lib/sdrpp/plugins folder.

The plugin can then be enabled from the module manager in SDR++, under the name radiosonde_decoder.

Building from source

If no binary is available for your platform, you can build this plugin from source:

1. Download the SDR++ source code: git clone https://github.com/AlexandreRouma/SDRPlusPlus
2. Open the top-level CMakeLists.txt file, and add the following line in the # Decoders section at the top:

option(OPT_BUILD_RADIOSONDE_DECODER "Build the radiosonde decoder module (no dependencies required)" ON)

3. In that same file, search for the second # Decoders section, and add the following lines:

if (OPT_BUILD_RADIOSONDE_DECODER)
add_subdirectory("decoder_modules/sdrpp_radiosonde")
endif (OPT_BUILD_RADIOSONDE_DECODER)

4. Navigate to the decoder_modules folder, then clone this repository: git clone https://github.com/dbdexter-dev/sdrpp_radiosonde --recurse-submodules
5. Build and install SDR++ following the guide in the original repository
6. Enable the module by adding it via the module manager