DanGdl / Linux_Driver_Tutorial

A Tutorial how to get started with Linux Kernel Modules and Linux Drivers.

Linux Driver Tutorial

Here you can find examples for simple Linux Kernel Modules and Linux Drivers.

Preparation

I used a Raspberry Pi 3 to develop and test my modules and drivers. To compile them, you need to install the Kernel headers on your Pi. On Raspbian you can do this with the following command:

sudo apt install raspberrypi-kernel-headers

You also need the build utils (make, gcc, ...) but they come preinstalled on Raspbian.

Content

In this repo you can find examples for:

1. Simple Kernel Module
2. Device Numbers and Device Files
3. Create device file in driver and callbacks
4. GPIO Driver
5. Text LCD Driver
6. PWM Module
7. Temperature Sensor (I2C)
8. Timer in Linux Kernel Modules
9. High Resolution Timer in Linux Kernel Modules
10. Accessing SPI with a Linux Kernel Module (BMP280 sensor again)
11. Using a GPIO Interrupt in a Linux Kernel Module
12. Using Parameters in a Linux Kernel Module
13. IOCTL in a Linux Kernel Module
14. Threads in a Linux Kernel Module

More Information

For more information about my Linux Driver examples check out my videos and my playlist