Flipper Zero RBG Backlight!!!

`Big thanks to Quenon#1989, t.me/hitriy and axum#6461 for making this possible!`

Here are the links to everything you will need!

Capacitors - https://www.digikey.com/en/products/detail/kyocera-avx/06036C104JAT2A/1600414

Leds, Pack of 10 - https://www.digikey.com/en/products/detail/adafruit-industries-llc/4492/11569136

Thin gauge wire (im using 28 gauge bc its what i had) - https://shorturl.at/vBLY6

When purchasing the PCB's make sure to have the thickness set to 0.6mm and the layer ammount set as 2.

Showcase https://youtu.be/W1frMyVFv6Y

Tutorials

RGB Backlight Build Guides

Video Guide Made by myself https://youtu.be/pft1CI5ikA4

Here is a Tutorial made by t.me/hitriy https://telegra.ph/Flipper-Zero-RGB-backlight-guide-12-26

Another Tutorial on how to remove the led backlight board (also made by t.me/hitriy) https://telegra.ph/Izmenenie-cveta-podsvetki-Flipper-Zero-11-14 you will need to translate it unless you speak russian

PCB Assembly

Here is a video i made on assembling the pcb https://youtu.be/N64fDjziTaE

Firmware Stuff

All of the repos below have been modified with their respective patches (FW Made by Quenon#1989)

Unleashed - https://github.com/quen0n/unleashed-firmware-rgb

OFW - https://github.com/quen0n/flipperzero-firmware-rgb

How to compile from the repos above

Step 1: git clone --recursive FIRMWARELINKFROMABOVE

Step 2: ./fbt updater_package

Step 3: Navigate to dist\f7-D\ in the cloned repos folder ( Usually found at Documents\GitHub)

Step 4: Copy the f7-update-local folder to the Update folder on your Flipper

Step 5: On your Flipper Navigate to the Update folder

Step 6: Open the f7-update-local folder

Step 7: Update from the update.fuf file ( It will have a picture of a box with an arrow next to it)

How to update from the pre compiled firmware

Step 1: git clone --recursive https://github.com/Z3BRO/Flipper-Zero-RBG-Backlight

Step 2: Navigate to the cloned repo ( usually its Documents\GitHub\Flipper-Zero-RBG-Backlight)

Step 3: Open the Update Files folder

Step 4: Copy the desired folder to the Update Folder on your Flipper

Step 5: On your Flipper Navigate to the Update folder

Step 6: Open the folder you just added to the sd card

Step 7: Update from the update.fuf file ( It will have a picture of a box with an arrow next to it)

Notes

Here is a video on how to use git patch files https://www.youtube.com/watch?v=ArbQNoNlFXk

DXVVAY / Flipper-Zero-RBG-Backlight