DVDAndroid / find_veth_docker

Simple script to find out which veth interface on the host corresponds to the eth0 interface of a container

find_veth_docker

Simple script to find out which veth interface on the host corresponds to the eth0 interface of a container

Changelog

30/05/2023

Added more inspection for each container considered. Besides veth information:

• we have the IP address of the container, which can be useful, when some service is running inside and we want to use it from the host (e.g., DNSproxy, pihole)
• MAC address: can be useful, for instance, when crafting packets from the host and send them into the container
• Bridge: the docker bridge on the host the container's veth is connected virtually

New dependency: jq for parsing JSON-output of docker inspect commands. Dependancy checked when running the script. If fails, please install jq.

05/05/2023

There is no requirement anymore. The script has been refactored and rethought and now does not have any dependency from the containers. Whatever container you are running, the veth interface can be identified.

18/08/2023

When defining your own network stack, do not use dashes ('-') in the network name. Use only underscores ('_'). For instance, in your docker-compose.yml, follow this approach

networks:
  internal:
    name: adguard_proxy_network
    ipam:
      config:
        - subnet: 172.22.1.0/24

Mind the '_' in the name field.

Usage

This script finds out which vethXXXX is connected to what container!
Example: sudo ./find_veth_docker.sh -n <CONTAINER_NAME> -i <INTEFACE_IN_CONTAINER>
		-n <CONTAINER_NAME>: set here the name of the container (Default: No name specified, printing all containers' data).
		-i <INTERFACE_IN_CONTAINER>: set here the name of the interace in the container (Default: eth0).

Example

sudo ./find_veth_docker.sh
Testing dependencies (jq)...                                                                                                                               [DONE]
VETH@HOST	VETH_MAC		CONTAINER_IP	CONTAINER_MAC		Bridge@HOST		Bridge_IP	Bridge_MAC		CONTAINER
vethf1cafc6	26:9e:b8:64:db:f8	172.30.1.3	02:42:ac:1e:01:03	br-22977ef1c283		172.30.1.1/24	02:42:1e:ba:ce:ed	pihole
vetha4867b4	62:5d:d2:59:81:1e	172.30.1.4	02:42:ac:1e:01:04	br-22977ef1c283		172.30.1.1/24	02:42:1e:ba:ce:ed	dnscrypt-proxy
veth5c15bec	b6:e6:17:5c:ef:82	172.20.1.2	02:42:ac:14:01:02	br-5399ca212f48		172.20.1.1/24	02:42:a6:fc:1a:a0	portainer

Or, if you know the container name, you can filter on it straight away.

sudo ./find_veth_docker.sh -n pihole
Testing dependencies (jq)...                                                                                                                               [DONE]
VETH@HOST	VETH_MAC		CONTAINER_IP	CONTAINER_MAC		Bridge@HOST		Bridge_IP	Bridge_MAC		CONTAINER
vethf1cafc6	26:9e:b8:64:db:f8	172.30.1.3	02:42:ac:1e:01:03	br-22977ef1c283		172.30.1.1/24	02:42:1e:ba:ce:ed	pihole

Using output for scripts

You might want to change some setting for a particular container's vethXXXX device. Let's take an example for ethtool that disables checksumming on the interfaces.

sudo ethtool -K $(./find_veth_docker.sh -n google |grep -v @|awk '{print $1}') tx off rx off