CvH / HS

Mini OS for RPi & MMDVM Hotspots / Repeaters

Mini OS for RPi & MMDVM Hotspots / Repeaters

Supported RPis

• Raspberry Pi Zero W
• Raspberry Pi Model B+
• Raspberry Pi 2 Model B
• Raspberry Pi 3 Model B
• Raspberry Pi 3 Model B+

Supported Modems / Displays

• MMDVM HS Hat
• ZUMspot
• Any MMDVM connected via UART pins
• Any MMDVM connected via Arduino Due
• 0.96" i2c OLED display

BUILD

make

INSTALL

# create partitions
parted -s /dev/mmcblk0 mklabel msdos
parted -s /dev/mmcblk0 -a opt mkpart primary fat32 0% 64MB
parted -s /dev/mmcblk0 set 1 boot on
parted -s /dev/mmcblk0 -a opt mkpart primary ext4 64MB 100%

# format partitions
mkfs.vfat /dev/mmcblk0p1 
mke2fs -t ext4 -m 0 /dev/mmcblk0p2

# install
mkdir -p /tmp/moo
mount /dev/mmcblk0p1 /tmp/moo
tar xf HS.*.tar -C /tmp/moo
umount /tmp/moo

INITIAL SETUP

root password: t4sh4kb4t3

ap mode ssid / passphrase (for initial set up): HS-AP / t4sh4kb4t3

config files: /etc/config - copy whatever you need to /storage/.config

downloads