-
All files are published under CC BY-NC-SA 4.0 if not marked differently
-
DO NOT USE COMMERCIALLY!
-
Build for yourself or for a friend, but do not sell builds, PCBs, pannels or any parts of the designes in this repository!
-
Feel free to modify, copy and use all files provided here. If you want to publish derivative work, please do so under same license as original
-
Any feedback and collaboration is very welcome!
-
Please feel free to open an issue on the issues tab
Have you built a module and would like to say thank you? https://paypal.me/LorenzNeumann
- 8 channels In/Out ADAT Interface
- Outputs are DC coupled
- Inputs can be switched with jumpers between AC and DC coupling (In 2 groups: channel 1-4 and channel 5-8)
- Low noise: -110dB
- Low THD: >0.01% @ 1kHz, -6dB(+-5Vpp)
- 22kOhm input-impedance, 1kOhm output-impedance
- 8HP
- All channels with bicolored indicator LED
- ADAT sync indicator LED
- No Ī¼Controller, no programming required, hardware only
- CC BY-NC-SA 4.0 DO NOT USE COMMERCIALY!
- small and dense SMD build (0603,TSSOP)
- 180mA @ +12V and 100mA @ -12V (Without connected ADTA-signal: 14mA @ +12V and 0mA @ -12V)
- VCF based on the Moog Transistor Ladder Filter
- Compensation for loss of bass in high resonance settings via potentiometer
- 6,12,18,24 dB/Oct selectable via potentiometer or CV!
- 2 Inputs with attenuator for audio and CV
- Seperate V/Oct input.
- Input-Drive indicator LED
- 8HP
- CC BY-NC-SA 4.0
- small and dense SMD build (0603, SOIC, SOT-363!)
- 45mA @ +12V and 25mA @ -12V
- PCB and Panel is available at synthCube
- Quick demo: https://youtu.be/XMdGtwIK5IQ
- BETA!
- Modification of Mutable Instruments Ears
- 2 seperat channels of original design, no internal contact microphone
- no jumpers, fixed values for fast Envelope Follower and Gate-Threshold of 1V
- 4HP
- CC-BY-SA 3.0, Orginal schematics by Emilie Gillet
- small and dense SMD build (0603, TSSOP)