Here is the P3D QAZ Case derived from dingusxmcgee_#1691 's Simple QAZ Case from the 40% Discord
-All CAD, the STL file, and the .dxf for cutting is supplied.
-As with dingusxmcgee's QAZ-Simple, standoffs are needed to use this case with current sales of QAZ PCB. M2x10mm standoffs are needed for builds with a plate, plateless builds need M2x5mm standoffs and M2 washers.
-8x M2x8mm screws are needed to attach the QAZ PCB to the standoffs through the acrylic bottom.
-M2x8mm self tapping screws are needed to attach the acrylic bottom to the printed case shell. They are available at McMaster
-The design is based on 1/8" thick acrylic, but 3mm will work as well as <3mm thick metals cut through sendcutsend for example
