Custom AirGradient Sketch

AirGradient’s sensor set up is a good base and reasonably affordable. This Arduino sketch allows you to integrate with a locally run InfluxDB instance or MQTT. This also allows you to easy integrate with Home Assistant. This was loosely based off of AirGradient’s original example. A couple additional features are also included.

Note: InfluxDB isn't required, there is a config option that will allow you to disable it.

Getting Started

Step 0 | Prerequisites

Assemble the AirGradient device - Instructions here
Install Arduino - Download here
Download this repository - Click the green “Code” button and then “Download ZIP”
Unzip the folder, navigate to the AirQualityMonitor and copy the example config file. Paste it into the same directory and rename it DeviceConfig

Step 1 | Setting up Arduino

Add ESP8266 platform information.

Open the Arduino sketch file. Then open the Preferences menu, and add http://arduino.esp8266.com/stable/package_esp8266com_index.json to Additional Board Manager URLs Image
Open the Board Manager and search for and install: esp8266 by ESP8266 community Image
Load the board preferences by navigating to Tool -> Board: -> ESP8266 Boards, then select LOLIN(WEMOS) D1 R2 & mini Image

Add the required libraries.

Open library manager, search for and install: AirGradient Air Quality Sensor Image

If only using sensors, with no connectivity skip to step two

Search for and install: ESP8266 and ESP32 OLED driver for SSD1306 displays by ThingPulse Image

Only needed if you enable Influxdb

Search for and install: ESP8266 Influxdb by Tobias Schürg, InfluxData Image

Only needed if you enable MQTT

Search for and install: home-assistant-integration by Dawid Chyrzynski Image You will be asked if you would like to install dependencies, select Install all Image

Step 2 | Configuration

Navigate to DeviceConfig.hpp tab and enable any features you would like to use. Then fill out their corresponding credentials.

Once customization is complete, plug the device (esp8266) into your computer then click upload. Optionally, if you want to monitor what the device is doing, you can open Serial Monitor

Modifications

Removed captive portal. Wi-Fi credentials are now defined in the config file
Data can now be sent to influxDB
Added the ability to display Fahrenheit on display, celsius is still reported to the database
Added a calibration offset for temperature, the calibration value is subtracted from the reading
Added the ability to update the database and display independently
Added the ability to control the timings of all features independently
Added MQTT, with Home Assistant Auto-Discovery
Added ability to easily enable/disable Wi-Fi, MQTT and influxDB

ChaseCares / AirGradient-InfluxDB