This is a program to help configure Studica robots. Built in a classroom environment for VMXpi robots and RealVNC Viewer, this program validates and generates a command to configure the robot given a name, number and password (if enabled). By default, password configuration is off, and the set password is password
. The generated command can be pasted into a terminal window inside RealVNC Viewer.
When the program starts up, all available fields are empty. The command will not generate until all fields are filled in and valid. Once you fill in the robot's name, number, and password if enabled, then the command will show. Click Copy
to copy the command, then you can paste it into your RealVNC Viewer window. It is highly recommended to not modify the command once pasted into RealVNC viewer.
The restrictions to each field are as follows:
- No field can contain whitespace
- No field can be empty
- Name cannot start with a number
- Number must be a number and a number only
- Number must be between 0-9999 inclusive
robot-rename.exe
file does not allow password configuration by default. If you want to allow password configuration, you can:
- Run the
robot-rename-fpass.exe
file (compiled with password field force enabled) - Run the
robot-rename-password.bat
file in the same directory asrobot-rename.exe
, or - Run
robot-rename.exe
with the environment variableROBOT_RENAME_CFG_PASSWORD
defined to any value (which is what the batch file does).