Arduino Clock
A 4-Digit Seven Segment Clock with Thermometer
Wiring Connections
Initially I wired connections according to ecotronics Blog. Seven Segment connections of this project: a = 6; b = 7; c = 8; d = 9; e = 10; f = 11; g = 12; p = A5; // I did not want to use 13 due to built-in led. d4 = 5; d3 = 4; d2 = 3; d1 = 2;
Thermistor Connection (Thermometer): Thermistor should be connected with an equal resistor serially from + to - and their junction should be connected as: ThermistorPin = A3;
Buttons for setting clock: SetModeButton = A2; SetHourButton = A0; SetMinuteButton = A1;
Additional Libraries
Libraries can be found modified (if needed) or unmodified in this project as "libraries" folder.
This project uses TimerOne (Paul Stoffregen - CC BY 3.0 US) and SevSeg (Nathan Seidle - Beerware license).
Created By
Ozan KARAALİ, 2017