How to compile with Arduino IDE unter Microsoft Windows:
- Sync the repository from github or download the complete archive as a zip archive.
- Extract or copy all files from src and lib the files to a directory called fhemduino
- rename sketch.ino into fhemduino.ino. The name of the sketch must be the same as the directory where it resides.
- Look at the sketch.h file, to enable or disable features of the fhemduino.
- Open fhemduino.ino in the IDE and just compile it.
Features can be toggelt to on with removing the slashes in front of the switch. Example: To compile the sketch without support for KW9010 sensor:
line: //#define COMP_KW9010 // Compile sketch with KW9010 support
To compile the sketch with support for KW9010 sensor just remove the '//' in front of the line:
line: #define COMP_KW9010 // Compile sketch with KW9010 support
The following features can be enabled / disabled during compile time. Others may work or do not work.
:#define COMP_DCF77` // Compile sketch with DCF-77 Support (currently disableling this is not working, has still to be done)
:#define COMP_PT2262` // Compile sketch with PT2262 (IT / ELRO switches)
:#define COMP_DOORBELL` // Compile sketch with door bell support: Tchibo / Heidemann HX Pocket (70283)
:#define COMP_FA20RF` // Compile sketch with smoke detector Flamingo FA20RF / ELRO RM150RF
:#define COMP_TEMP_HUM` // General define to compile sketch with temperature / humidity devices
:#define COMP_KW9010` // Compile sketch with KW9010 support
:#define COMP_NC_WS` // Compile sketch with PEARL NC7159, LogiLink WS0002 support
:#define COMP_EUROCHRON // Compile sketch with EUROCHRON / Tchibo support
:#define COMP_LIFETEC // Compile sketch with LIFETEC support
:#define COMP_TX70DTH // Compile sketch with TX70DTH (Aldi) support
:#define COMP_AURIOL // Compile sketch with AURIOL (Lidl Version: 09/2013); only temperature
:#define COMP_IT_TX // Compile sketch with Intertechno TX2/3/4 support
:#define USE_IT_TX // Use 14_CUL_TX.pm Module which is already included in fhem. If not defined, the 14_fhemduino_Env module will be used.
Do not disable #define COMP_OSV2 this will result in an error.
Just open an issue