CJNE / thermiagenesis

Home assistant custom component for Thermia Inverter/Mega heat pumps

CJNE/thermiagenesis Issues

Since update to 0.0.11 Registers are not updating
Updated 5 months ago
Room temperature showing 200 degrees
Updated 6 months ago
Thermia Atlas 18 - Translation Error: The intl string context variable "model" was not provided to the string "Thermia Heatpump: {model}": 192.168.99.115:502
Closed 6 months ago11
Deprecated supported features
Closed 6 months ago
Error logging, but still seems to work okay
Updated 8 months ago
Faster response on climate change of setpoints
Updated 8 months ago
Issue with Slider-value
Closed 8 months ago1
Question - heat Out temp
Closed 8 months ago2
ERROR log: Unable to prepare setup for platform thermiagenesis.climate: Platform not found (No module named 'homeassistant.util.temperature')
Closed 9 months ago5
Invalid config HA 2023.11 - unable to prepare setup for platform thermiagenesis.climate
Closed 8 months ago2
System Supply Line Temperature
Closed 9 months ago8
Feaure Req: Show anti legionella mode on tap water climate
Updated 10 months ago
High_pressure_side, low_pressure_side unit correct?
Updated 10 months ago
Smart control of Genesis heat pump based on electricity price
Updated 10 months ago22
Almost everything is inactive
Closed a year ago3
Current pool temperature - wrong scaling
Updated a year ago
Error when enabling Switch enable_fixed_system_supply_set_point
Updated a year ago
After an update to the latest version of HA and hacs-thermiagenesis no connection
Updated a year ago2
Boost on Atlas pumps?
Updated 2 years ago2
How to change Coils or Holding Registers of Thermia per Modbus
Updated 2 years ago
Set values through modbus
Closed 2 years ago7
Connection error when trying to add the integration.
Updated 2 years ago3
Depricated temperature utility
Closed 2 years ago
Read out total Kwh used
Closed 2 years ago2
No power measurements from atlas 12
Closed 2 years ago1
Different device_class for alarms
Closed 2 years ago1
Variable model was not provied - Connection Error
Closed 2 years ago4
För gammal Genesis sw?
Closed 2 years ago7
Possible to set the Room temperature sensor value?
Closed 2 years ago
The integration stopped to work after upgrade from "Home Assistant Core 2022.6.1" to "Home Assistant Core 2022.6.3".
Closed 2 years ago19
Unit issue for electric meter entities
Closed 2 years ago6
Tap water heating control
Closed 3 years ago11
Unable to configure
Closed 3 years ago10