BrushlessPower/SBUS2-Telemetry Issues
SBUS Channel data
Closed 27Send RPM value to receiver
Closed 13It doesn't work with R7108SB
Updated 9GPS SBS-02G
Updated 33[Feature] Add JetCat V10 Sensor
Updated 3GPS Altitude not working
Updated[ESP32] TX and RX pin set function
Updated 1[ESP32] ISR IRAM_ATTR Flash Issue
Updated 2Telemetry not working with 3 sensor
Updated 50SBUS_Ready() forever true
Updated 4Frame loss
Closed 13[Feature Request] STM32 Support
Updated 1ESP32 port tx/rx for sbus2
Closed 26UART Half Duplex on a Single Pin
Closed 1add ESP32 support
Closed 3Flow meter for fuel measurement
Closed 2Temperature Sensors
Updated 1RPM Sensor Range
Closed 1Output FER -> Frame Error Rate
Closed 5Futaba SBUS2 problem
Closed 13GPS Latitude & Longitude problem
Closed 12add Sensors with real Names
Closed 2Radio: Futaba 7PX
Closed 9Wrong GPS LAT and LON
Closed 1Support Arduino NANO?
Closed 3Sensor Slot 8 to 31 doesn't work
Closed 1Wrong Timing between Slots
Closed 1Issue getting it to work
Closed 4