Simple personal server to serve audio files from directories. Intended primarily for audio books, but anything with decent directories structure will do. Focus here is on simplicity and minimalistic design.
Server is in Rust, default web client (HTML5 + Javascript) is intended for modern browsers (latest Firefox or Chrome) and is integrated with the server. There is also Android client and API for custom clients.
For some background and video demo check this article Audioserve Audiobooks Server - Stupidly Simple or Simply Stupid?
Audioserve is intended to serve files from directory in exactly same structure (recently with some support for .m4b and similar single file audiovooks), audio tags are not considered. So recommended structure is:
Author Last Name, First Name/Audio Book Name
Author Last Name, First Name/Series Name/Audio Book Name
Files should be named so they are in right alphabetical order - ideal is:
001 - First Chapter Name.opus
002 - Seconf Chapter Name.opus
But this structure is not mandatory - you will just see whatever directories and files you have, so use anything that will suite you.
In folders you can have additional metadata files - first available image (jpeg or png) is taken as a cover picture and first text file (html, txt, md) is taken as description of the folder.
Search is done for folder names only (not individual files, neither audio metadata tags).
You can have several libraries/ collections - just use several root directories as audioserve start parametes. In client you can switch between collections in the client. Typical usage will be to have separate collections for different languages.
By default symbolic(soft) links are not followed in the collections directory (because if incorretly used it can have quite negative impact on search and browse), but they can be enabled by --allow-soflinks
program argument.
Recently better support for .m4b (one file with chapters metadata) and similar was added. Such file is presented as a folder, which contains chapters. Also long audiofile without chapters meta, can be split into equaly sized parts/chapters (this has a slight disadvantage as split can be in middle of word). To enable later use --chapters-from-duration
to set a limit, from which it should be used, and chapters-duration
to set a duration of a part. Also for large files, which do not have chapters metadata, you can easily supply them in a separate file, with same name as the audio file but with additional extenssion .chapters
- so it looks like your_audiobook.mp3.chapters
. This file is simple CSV file (with header), where first column is chapter title, second is chapter start time, third (and last) is the chapter end time. Time is either in seconds (like 23.836
) or in HH:MM:SS.mmm
format (like 02:35:23.386
).
There are some small glitches with this approach - search still works on directories only and cover and description metadata are yet not working (plan is to extract them from the audio file metadata). Apart of that chapters behaves like other audio files - can be transcoded to lower bitrates, seeked within etc. Also beware that web client will often load same part of chapter again if you're seeking within it (especially Firefox with m4b), so it's definitelly not bandwidth optimal (similar issue appears when often seeking in trancoded file).
Recently (from version 0.10) audioserve supports sharing playback positions between clients. This is basically used to continue listening on next client, from where you left on previous one. It's supported in the included web client and in the recent Android client (from version 0.8). In order to enable position sharing you'll need to define 'device group' in the client (on login dialog in web client and in settings in Android client) - group is just an arbitrary name and devices within same group will share playback position.
After you have several active devices with same group name, you'll be notified when you click play and there is more recent playback position in the group and you can choose if jump to this latest position or continue with current position. There is also option to check latest position directly (in web client it's icon in the folder header, in Android client it's in options menu).
This function is kind of experimental now, it works, but not ideally, so definitelly interested in feedback, as I'm not using it much, I'm mostly listening on just one device - my mobile.
Audioserve is not writing anything to your media library, so read only access is OK. The only file where it needs to write is a file were it keeps its secret key for authentication (by default in ~/.audioserve/audioserve.secret
, but it can be specified by command line argument). And optionaly it writes files to transcoding cache (see below) and positions file.
Authentication is done by shared secret phrase (supplied to server on command line or more securely via environment variable), which clients must know. Shared secret phrase is never sent in plain (it's sent as salted hash). If correct shared secret hash is provided by client, sever generates a token, using its secret key, which is then used for individual requests authentication. Token then can be used in cookie or HTTP Authorization header (Bearer method). Token validity period is one year by default, but can be set with command line argument, but system generally expects token validity to be at least 10 days. As the token can be used to steal the session, https is recommended (TLS support is build in).
Audioserve supports TLS/SSL - to enable it you need to provide your private server key as PKCS#12 file (in --ssl-key
argument). Here is quick tip how to create private key with self-signed certificate (for testing purposed only):
openssl req -newkey rsa:2048 -nodes -keyout key.pem -x509 -days 365 -out certificate.pem \
-subj "/C=CZ/ST=Prague/L=Prague/O=Ivan/CN=audioserve"
openssl pkcs12 -inkey key.pem -in certificate.pem -export -passout pass:mypass -out audioserve.p12
rm key.pem certificate.pem
You can also run audioserve behind reverse proxy like nginx or ha-proxy and terminate SSL there (in that case you can compile audioserve without TLS support see compilation without default features below)
Audioserve is inteded to serve personal audio collections of moderate sizes. For sake of simplicity it does not provide any large scale perfomance optimalizations. It's fine to serve couple of users from collections of couple of thousands audiobooks, if they are reasonably organized. That's it, if you're looking for solution for thousands or millions of users, look elsewere. To compensate for this audioserve is very lightweight and by itself takes minimum of system resources.
Browsing of collections is limited by speed of the file system. As directory listing needs to read audio files metadata (duration and bitrate, eventually chapters), folders with too many files (> 200) will be slow to open. Search is done by walking through collection directory structure, it can be slow - especially the first search (subsequent searches are much, much faster, as directory structure from previous search is cached by OS for some time). Recent audioserve versions provide optional seach cache, to speed up search significantly - see below.
But true limiting factor is transcoding - as it's quite CPU intensive. Normally you should run only a handful of transcodings in parallel, not much then 2x - 4x more then number of cores in the machine. For certain usage scenarios enabling of transcoding cache can help a bit.
For fast searches enable search cache with --search-cache
, it will load directory structure of collections into memory, so searches will be blazingly fast (for price of more occupied memory). Search cache monitors directories and update itself upon changes (make take a while). Also after start of audioserve it takes some time before cache is filled (especially when large collections are used), so search might not work initially.
Optionally you can enable transcoding cache (by compiling audioserve with transcoding-cache
feature). Contribution of this cache to overall performance depends very much on usage scenarios. If there is only one user, which basically listens to audiobooks in linear order (chapter after chapter, not jumping back and forth), benefit will be minimal. If there are more users, listening to same audiobook (with same transcoding levels) and/or jumping often back and forth between chapters, then benefit of this cache can be significat. You should test to see the difference (when transcoding cache is compiled in it can be still disabled by --t-cache-disable
option).
Audioserve offers possibility to transcode audio files to opus format (opus codec, ogg or webm container) or few other formats to save bandwidth and volume of transfered data. For transcoding to work ffmpeg
program must be installed and available on system's PATH.
Transconding is provided in three variants and client can choose between them (using query parameter trans
with value l,m or h):
- low - (default 32 kbps opus with 12kHz cutoff mono)
- medium - (default 48 kbps opus with 12kHz cutoff)
- high - (default 64 kbps opus with 20kHz cutoff)
As already noted audioserve is intended primarily for audiobooks and believe me opus codec is excellent there even in low bitrates. However if you want to change parameters of these three trancodings you can easily do so by providing yaml confing file to argument --config
. Here is sample file:
transcoding:
low:
opus-in-ogg:
bitrate: 16
compression_level: 3
cutoff: WideBand
mono: true
medium:
opus-in-ogg:
bitrate: 24
compression_level: 6
cutoff: SuperWideBand
mono: true
high:
opus-in-ogg:
bitrate: 32
compression_level: 9
cutoff: SuperWideBand
In each key first you have specification of codec-container combination, currently it supports opus-in-ogg
, opus-in-webm
, mp3
, aac-in-adts
(but other containers or codecs can relatively easily be added, provided they are supported by ffmpeg and container creation does not require seekable output - like MP4 container).
I have good experinces with opus-in-ogg
, which is also default. opus-in-webm
works well in browsers (and is supported in browsers MSE API), but as it does not contain audio duration after trascoding, audio cannot be sought during playback in Android client, which is significant drawback. mp3
is classical MPEG-2 Audio Layer III audio stream. aac-in-adts
is AAC encoded audio in ADTS stream, it also may have problems with seeking in Android client.
For opus transcodings there are 3 other parameters, where bitrate
is desired bitrate in kbps, compression_level
is determining audio quality and speed of transcoding with values 1-10 ( 1 - worst quality, but fastest, 10 - best quality, but slowest ) and cutoff
is determining audio freq. bandwidth (NarrowBand => 4kHz, MediumBand => 6kHz, WideBand => 8kHz, SuperWideBand => 12kHz, FullBand => 20kHz).
For mp3 transcoding there are also 3 parameters: bitrate
(in kbps), compression_level
with values 0-9 (0 - best quality, slowest, 9-worst quality, fastest; so meaning is inverse then for opus codec) and abr
(optional), which can be true
or false
(ABR = average bit rate - enables ABR, which is similar to VBR, so it can improve quality on same bitrate, however can cause problems, when seeking in audion stream).
aac-in-adts
has one mandatory parameter bitrate
(in kbps) and two optional parameters sr
- which is sample rate of transcoded stream (8kHz, 12kHz, 16kHz, 24kHz, 32kHz, 48kHz, unlimited) and ltp
(Long Term Prediction), which is true
or false
and can improve audio quality, especially for lower bitrates, but for significant performance costs ( abou 10x slower).
All encodings have optional parameter mono
, if set to true
audio will be down-mixed to mono.
Overall opus-in-ogg
provides best results from both quality and functionality perspective, so I'd highly recommend to stick to it, unless you have some problem with it.
You can overide one two or all three defaults, depending on what sections you have in this config file.
Audioserve can take parameters from command line, environment variables and config file. For command line arguments check them with audioserve -h
. Generally you need to provide shared secrect (or option --no-authentication
for public access) and root of media library (as noted above you can have severals libraries).
audioserve
is server executable and it also needs web client files , which are index.html
and bundle.js
, which are defaultly in ./client/dist
, but their location can by specified by argument -c
.
For majority of command line arguments there is also appropriate environment variable, which starts with prefix AUDIOSERVE_
and then command line argument name (without leading dashes) transcribed from kebab-case to SCREAMING_SNAKE_CASE, so for instance argument --shared-secret
has coresponding env. variable AUDIOSERVE_SHARED_SECRET
.
All audioserve parameters can be also provided in configuration file via --config
argument. Configuration file is in YAML format and somehow coresponds to command line arguments, but not exactly. Easiest way how to create config file is to use argument --print-config
, which prints current configuration, including all used arguments to standard output.
Web client is bundled with server. It provides simple interface (using bootstrap 4 CSS framework and JQuery JS library). Web client will remember your last playback position in a folder, so you can easily continue listening, even after page reload. Use three vertical dots in top right corner to choose required transcoding and subfolder items ordering. Otherwise it's rather minimalistic (following KISS principle).
It's tested on Firefox and Chrome (on Linux and Android, should work on Windows, on OSX too on these browsers). On iOS default transcoding (opus+ogg) is not working - so switch transconding off or try custom transcoding profile.
Web client is not working on MS Edge(this might be fixed in future) and IE (which will never be supported).
Android client code is available on github.
audioserve server provides very simple API (see api.md for documentation), so it's easy to write your own clients.
Easiest way how to test audioserve is to run it as docker container with prebuild Docker image (from Docker Hub):
docker run -d --name audioserve -p 3000:3000 -v /path/to/your/audiobooks:/audiobooks izderadicka/audioserve --no-authentication /audiobooks
Then open http://localhost:3000 - and browse your collection. This is indeed the very minimal configuration of audioserve. For real deployment you'd like provide provide more command line parameters (or environment variables or your custom config file) - see more complex example below.
Of course you can build your own image very easily with provided Dockerfile
, just run:
docker build --tag audioserve .
When building docker image you can use --build-arg CARGO_ARGS=
to modify cargo build command and to add/or remove features (see below for details). For instance this command will build audioserve with transcoding cache docker build --tag audioserve --build-arg CARGO_ARGS="--features transcoding-cache" .
There is also one additional env. variable PORT
- TCP port on which audioserve serves http(s) requests (defaults to: 3000) - this is useful for services like Heroku, where container must accept PORT variable from the service.
A more detailed example (audioserve is an entry point to this container, so you can use all command line arguments of the program, to get help for the program run this command docker run -it --rm izderadicka/audioserve --help
):
docker run -d --name audioserve -p 3000:3000 \
-v /path/to/your/audiobooks1:/collection1 \
-v /path/to/your/audiobooks2:/collection2 \
-v /path/for/audioserve-data:/home/audioserve/.audioserve \
-e AUDIOSERVE_SHARED_SECRET=mypass \
izderadicka/audioserve \
--ssl-key /audioserve/ssl/audioserve.p12 --ssl-key-password mypass \
--search-cache \
/collection1 /collection2
In the above example, we are adding two different collections of audiobooks (collection1 and collection2).
Both are made available to the container via -v
option and then passed to audioserve on command line.
Also we have maped with -v
some folder to /home/audioserve/.audioserve
, where runtime data of audioserve are stored (server secret, caches ...)
We set the shared secret via AUDIOSERVE_SHARED_SECRET
env.variable and specify use of TLS via --ssl-key
and ssl-key-password
(the tests only self-signed key is already prebundled in the image, for real use you'll need to generate your own key, or use reverse proxy that terminates TLS). We also enable search cache with --search-cache
argument.
Static build of audioserve is available (for rencent releases) at github releases page. You can can just download and extract locally and run on any modern x86_64 linux.
You can also create your own static build with script build_static.sh
(Docker is required for this)
Now audioserve depends on ffmpeg's libavformat 4.1 (and its dependent libavutil and libavcodec libs), which is a complex beast. If you are building locally you need this dependence (plus couple of others). If you have available right version on your system you can dynamically link against it (remember it has to be correct version). Other option is to use feature partially-static
, which will download right version of ffmpeg, compile it and statically link it into audioserve (but then binary will be indeed bigger).
Install required dependencies (some dependecies are optional, depending on features chosen in build):
# Ubuntu - for other distros look for equivalent packages
sudo apt-get install -y openssl libssl-dev pkg-config\
ffmpeg yasm build-essential wget libbz2-dev zlib1g-dev libavformat-dev
Clone repo with:
git clone https://github.com/izderadicka/audioserve
To install locally you need recent Rust and NodeJS installed.
Compile Rust code (it has optional system dependencies to openssl,zlib, bz2lib, and libavformat, as you'll not have exact correct version of libavformat around, it's better to build required version statically into binary with partially-static
feature, beacause otherwise you might see problems like segfaults):
cargo build --release --features partially-static
Optionaly you can compile with/without other features (see below for details).
Build client in its directory (cd client
):
npm install
npm run build
Theoretically audioserve can work on Windows and MacOS (probably with only few changes in the code and building process (of libavformat)), but I never tried to build it there. Any help in this area is welcomed.
TLS support (feature tls
), symbolic links (feature symlinks
) and search cache (feature search-cache
) and folder download (feature folder-download
) are default features, but you can compile without them - just add --no-default-features
option to cargo build
command. And then evetually choose only features you need.
To add non-default features (like transcoding-cache
) compile with this option --features transcoding-cache
in cargo build
command.
Available features:
Feature | Description | Default | Program options |
---|---|---|---|
tls | Enables TLS support (e.g https) (requires openssl and libssl-dev) | Yes | --ssl-key --ssl-key-password to define server key |
symlinks | Enables to use symbolic links in media folders | Yes | Use --allow-symlinks to follow symbolic links |
search-cache | Caches structure of media directories for fast search | Yes | Use --search-cache to enable this cache |
folder-download | Enables API endpoint to download content of a folder in tar archive | Yes | Can be disabled with argument --disable-folder-download |
shared-positions | Clients can share recent playback positions via simple websocket API | Yes | |
transcoding-cache | Cache to save transcoded files for fast next use | No | Can be disabled by --t-cache-disable and modified by --t-cache-dir --t-cache-size --t-cache-max-files |
static | Enables fully static build of audioserve. Check above notes for static build | No | |
partially-static | Statically links libavformat (and related).Enables to run audioserve on systems, which do not have required version of libavformat | No |