ZenFS

ZenFS is a file system plugin that utilizes RockDB's FileSystem interface to place files into zones on a raw zoned block device. By separating files into zones and utilizing write life time hints to co-locate data of similar life times the system write amplification is greatly reduced compared to conventional block devices. ZenFS ensures that there is no background garbage collection in the file system or on the disk, improving performance in terms of throughput, tail latencies and disk endurance.

Dependencies

ZenFS depends on libzbd and Linux kernel 5.4 or later to perform zone management operations. To use ZenFS on SSDs with Zoned Namespaces kernel 5.9 or later is required.

Getting started

Build

Download, build and install libzbd. See the libzbd README for instructions.

Download rockksdb and the zenfs projects:

$ git clone https://github.com/facebook/rocksdb.git
$ cd rocksdb
$ git clone https://github.com/westerndigitalcorporation/zenfs plugin/zenfs

Build and install rocksdb with zenfs enabled:

$ DEBUG_LEVEL=0 ROCKSDB_PLUGINS=zenfs make -j48 db_bench install

Build the zenfs utility:

$ pushd
$ cd plugin/zenfs/util
$ make
$ popd

Configure the IO Scheduler for the zoned block device

The IO scheduler must be set to deadline to avoid writes from being reordered. This must be done every time the zoned name space is enumerated (e.g at boot).

echo deadline > /sys/class/block/<zoned block device>/queue/scheduler

Creating a ZenFS file system

Before ZenFS can be used in RocksDB, the file system metadata and superblock must be set up. This is done with the zenfs utility, using the mkfs command:

./plugin/zenfs/util/zenfs mkfs --zbd=/dev/<zoned block device> --aux-path=<path to store LOG and LOCK files>

Testing with db_bench

To instruct db_bench to use zenfs on a specific zoned block device, the --fs_uri parameter is used. The device name may be used by specifying --fs_uri=zenfs://dev:<zoned block device name> or by specifying a unique identifier for the created file system by specifying --fs_uri=zenfs://uuid:<UUID>. UUIDs can be listed using ./plugin/zenfs/util/zenfs ls-uuid

./db_bench --fs_uri=zenfs://dev:<zoned block device name> --benchmarks=fillrandom --use_direct_io_for_flush_and_compaction

ZenFS Internals

Architecture overview

ZenFS implements the FileSystem API, and stores all data files on to a raw zoned block device. Log and lock files are stored on the default file system under a configurable directory. Zone management is done through libzbd and ZenFS io is done through normal pread/pwrite calls.

File system implementation

Files are mapped into into a set of extents:

Extents are block-aligned, continious regions on the block device
Extents do not span across zones
A zone may contain more than one extent
Extents from different files may share zones

Reclaim

ZenFS is exceptionally lazy at current state of implementation and does not do any garbage collection whatsoever. As files gets deleted, the used capacity zone counters drops and when it reaches zero, a zone can be reset and reused.

Metadata

Metadata is stored in a rolling log in the first zones of the block device.

Each valid meta data zone contains:

A superblock with the current sequence number and global file system metadata
At least one snapshot of all files in the file system
Incremental file system updates (new files, new extents, deletes, renames etc)

Contribution Guide

ZenFS uses clang-format with Google code style. You may run the following commands before submitting a PR.

clang-format-11 -n -Werror --style=file fs/* # Check for style issues
clang-format-11 -i --style=file fs/*         # Auto-fix the style issues

BlaCkinkGJ / zenfs