Becircuit's repositories
controlirneopixel
It involves control of a neopixel with an IR remote control. Depending on the key pressed, a different sequence of colors is generated in the neopixel.
ShowMenuOled
How to do a menu selection in an Oled SSD1306
ShowImageOnOLED
Show an image on Oled SSD1306
ArduinoSleepMode
It is about a program where once the button is pressed for 5 sec, the circuit should be switched on. pressing the button should change the speed of the motor & LED brightness (maybe by pmw). Every time the button is pressed there should be motor speed and LED brightness should increase (10 variations in speed/brightness and blinking pattern). And if the button is pressed the circuit should be switched off
AC-dimmer
How to make an AC dimmer with the arduino with the use of external interrupt and timmer. An AC Dimmer allows the regulated control of AC voltage, allowing to obtain intermediate voltages between 0 and 220V AC and thus vary the intensity of brightness in bulbs or incandescent bulbs, the speed in ac motors such as fans, the power of a resistive heater and any other AC load.
Becircuit
Config files for my GitHub profile.