Barracuda09 / satip-client

SAT>IP-based Client-Server communication protocol for a TV gateway (Enigma2)

satipclient

SAT>IP Client FORK from: https://code.google.com/p/satip/

Supported options in /etc/vtuners.conf:

• tcpdata:1 - uses TCP instead of UDP for the connection with the satip server
• force_plts:1 - forces sending plts=on as part of the satip request
• fe:X - send fe=X as part of the satip request to force a specific adapter (useful on multiple satellite connections on different adapters)
• ipaddr - the ip address of the satip server
• port - the port of the satip server

Supported Startup arguments in /etc/init.d/satipclient:

• -m <debug_mask> Used for debugging (Add together)
  • MSG_MAIN 1
  • MSG_NET 2
  • MSG_HW 4
  • MSG_SRV 8
  • MSG_DATA 16
• -l <log_level> Log level: (default: 1)
  • 0: None
  • 1: Error
  • 2: Warning
  • 3: Info
  • 4: Debug
• -y Use syslog instead of STDERR for logging
• Example for /etc/init.d/satipclient:
  • start-stop-daemon -S -b -x /usr/bin/satipclient -- -m 3 -l 4 -y

Building

autoreconf --install
./configure
make

To compile for e.g. VU Solo 4K (ARMv7 architecture):

./configure --with-boxtype=vusolo4k --host=arm-linux-gnueabihf
make

Make sure you have g++ and cross-compilation tools for arm-linux-gnueabihf installed (e.g. using sudo apt-get install g++-arm-linux-gnueabihf), otherwise you'll end up with a binary for your host's architecture.