BCN3D Technologies's repositories
BCN3DSigmax-Mechanics
All the mechanics of the BCN3D Sigmax 3D Printer. http://www.bcn3dtechnologies.com
BCN3DSigmax-Electronics
6 Axis Open Source Electronics for BCN3D Sigma 3D Printer. http://www.bcn3dtechnologies.com
BCN3DSigmax-Process
Open Source Manufacturing process of the BCN3D Sigmax http://www.bcn3dtechnologies.com
BCN3DSigma-Process
Open Source Manufacturing process of the BCN3D Sigma
BCN3DSigma-Mechanics
All the mechanics of the BCN3D Sigma 3D Printer.
BCN3D-Cura-Mac
This is our personalized version of Cura for Mac based machines for printing with the brand new BCN3D Sigma.
BCN3D-Cura-SourceCode
This is the development Repository of BCN3D Cura
BCN3D-Cura-Windows
This is our personalized version of Cura for Windows machines for printing with the brand new BCN3D Sigma.
Hotend-Test-Bench
Electronic Board to test out 6 Hotends at a time
BCN3D-Kicad-library
Library used by BCN3D Technologies in hardware development with KiCAD
BCN3DPlus-Firmware
All the code you need to get your BCN3D+ up and running
Ringing-Remover-Plugin-for-Cura
Plugin for Cura to remove the ringing artifact on corners. Specifically designed for the BCN3D Sigma.
AVRDUDESS
A GUI for AVRDUDE
BCN3DR-Firmware
All the code you need to print with the BCN3DR
BCN3DIgnis-VisiCut
Fork de VisiCut para uso con una Ignis.
Arduino-Auto-Loader
Device based on a Raspberry Pi to upload the firmware up to 8 Electronics Boards at a time. AVRDude based.
Configurations
Settings for the slicing softwares tested by BCN3D for the BCN3D+, Paste Extruder and the Dual Extruder
Flowy-Oven
DIY Reflow oven for electronics prototyping
WPS-WorkPlaceSense
Little device that sense if an employee is on his desk and publish it online. Using a ESP8266 module and a PIR Sensor
Stepper-Driver-testbench
Electronics Test Bench used for testing and callibrating the Stepper drivers for the BCN3D Sigma
BCN3DPlusandR-Manuals
All the instructions needed for building your Open Source 3D printer, BCN3D+ & Upgrades and BCN3DR
BCN3DPlus-CAD
Do you want to redesign any part of the printer? Here you have the CAD files. Easy as pie.
BCN3DIgnis-Cut-Settings
Configuraciones de materiales y mappings para uso con una Ignis.
Paste-Extruder-Firmware
The code to run your BCN3D+ in paste extruder mode!