Termnetd (aka termpkg apparently) is a cool little application that lets you stream serial port data over the network. It's a terminal server daemon that exposes the serial port and tty devices directly to a network port.
First Get the repository, execute the configure script, change directory to the
platform detected and run the make command:
git clone git@github.com:carlos-jenkins/termnetd.git
cd termnetd
./configure
cd linux
make
Once installed, the configuration file, /etc/termnetd.conf, can be edited to
configure which serial port maps to which network port. It can be used to set
serial port connection settings as well. The format is as follows:
<IP port>:<state>:<device>:<termios options>;
Example:
3000:on:/dev/ttyS0:B115200 CLOCAL IGNBRK CRTSCTS CS8 CREAD;
Start termnetd by running from the command line:
termnetd
From another terminal use telnet or netcat to receive the data
nc localhost 3000
Copyright (C) 1995, 1996 Joseph Croft joe@croftj.net
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.