Artiume / docker-nsfminerOC

Docker container for Ethereum mining with CUDA (nsfminer) with Nvidia OC capabilities.

Docker container for Ethereum mining with CUDA (nsfminer) with Nvidia OC capabilities.

This Docker container was inspired by the docker-nsfminer which was inspired by docker-ethminer. It uses the nsfminer.

NOTE: Tested with Unraid 6.9.1

Requirements

• NVIDIA drivers for your GPU installed.

Usage

docker run \
-it --priveleged --restart unless-stopped --name=NsfminerOC --runtime=nvidia --gpus=all \
olehj/docker-nsfmineroc \
-e NSFMINER_GPU=0 \							# Set GPU ID
-e NSFMINER_GPUPOWERLIMIT=500 \						# Set power limit for GPU in Watt
-e NSFMINER_POWERMIZER=2 \						# Set PowerMizer performance level
-e NSFMINER_GPUGFXCLOCKOFFSET=0 \					# Set GPU graphics clock offset
-e NSFMINER_GPUMEMCLOCKOFFSET=0 \					# Set GPU memory clock offset
-e NSFMINER_HWMON=2 \							# Set Feedback level from nsfminer
-e NSFMINER_TRANSPORT=stratum1+ssl \					# Set transport for worker
-e NSFMINER_ETHADDRESS=0x516eaf4546BBeA271d05A3E883Bd2a11730Ef97b \	# Set your worker ethereum address
-e NSFMINER_WORKERNAME=worker \						# Set a worker name
-e NSFMINER_ADDRESS1=eu1.ethermine.org \				# Set address 1 for worker, both must be set
-e NSFMINER_ADDRESS2=us1.ethermine.org \				# Set address 2 for worker, both must be set
-e NSFMINER_PORT1=5555 \						# Set port for address 1
-e NSFMINER_PORT2=5555 \						# Set port for address 2
-e NSFMINER_GPUFANCONTROLL=0 \						# Set GPU fan controll, 0 will run auto and other fan settings are ignored
-e NSFMINER_GPUFAN1=0 \							# Set the FAN ID 1 of GPU
-e NSFMINER_GPUFANSPEED1=100 \						# Set the speed in percent of FAN ID 1
-e NSFMINER_GPUFAN2=1 \							#   Same as above, skip and delete if there's no more fans available.
-e NSFMINER_GPUFANSPEED2=100						# 

NOTE: -U [--cuda] (Mine/Benchmark using CUDA only) is set by default and can't be changed. -R [--report-hashrates] Report hashrates is set by default and can't be changed. --nocolor No color is set by default and can't be changed.

Show Logs

docker logs -f NsfminerOC

Example

docker run \
-it --priveleged --restart unless-stopped --name=NsfminerOC --runtime=nvidia --gpus=all \
docker-nsfmineroc \
-e NSFMINER_GPU=all \
-e NSFMINER_GPUPOWERLIMIT=330 \
-e NSFMINER_GPUGFXCLOCKOFFSET=0 \
-e NSFMINER_GPUMEMCLOCKOFFSET=1600 \
-e NSFMINER_HWMON=2 \
-e NSFMINER_TRANSPORT=stratum+tcp \
-e NSFMINER_ETHADDRESS=guodejie \
-e NSFMINER_WORKERNAME=001 \
-e NSFMINER_ADDRESS1=eth.f2pool.com \
-e NSFMINER_ADDRESS2=eth-backup.f2pool.com \
-e NSFMINER_PORT1=6688 \
-e NSFMINER_PORT2=6688 \

Build

To build the image locally

docker build -t olehj/docker-nsfmineroc .

Support

Leave a tip here 0x516eaf4546BBeA271d05A3E883Bd2a11730Ef97b