This is simple artnet node.
Required: Arduino UNO
Ethernet Shield with W5100/W5500
OLED display 128x32 I2C
module with max485
Universal Ethernet to DMX Interface
ONE DMX512 Port
Art-Net streaming DMX support
Can be used with any Art-Net compliant console or DMX software
Universe selectable by web browser
Stand-alone DMX buffer mode
WIRING
OLED DISPLAY I2C
VCC --> 5v or 3.3v
GND --> GND
SCL --> SCL
SDA --> SDA
MAX485 module
RO --> not connnected
RE + DE + VCC --> 5v (or VCC --> +5 , and RE + DE --> D2 PIN)
DI --> TX (D1 PIN)
GND --> GND
A --> DMX OUT
B --> DMX OUT
OLED REQUIRED TO CORRECT WORK
IF U DONT HAVE OLED DISPLAY _ USE NO OLED VERSION
U can configure it - use web browser - enter node ip (default 2.0.0.10)
A3 pin to Ground when boot = Factory Reset
Due to the limited amount of Arduino memory - the program recognizes only full ArtDMX frames - containing 512 channels, and ArtPool packages.
"Art-Net™ Designed by and Copyright Artistic Licence Engineering Ltd"
v1.4.6 Update of the ArtPollReply frame for Art-Net 4 Protocol Release V1.4 Document Revision 1.4dh 19/7/2023 Changes in DHCP and Static configuration storage Change of memory number on first startup Change of favicon.
Web configuration not work on Firefox - use Edge,Chrome,Opera ...